How to use the Crop Factor and Equivalent Focal Length Calculator tool
- Choose the format, from Micro Four Thirds through medium format film to 4x5 and 8x10 sheet film.
- Enter the focal length marked on the lens.
- Enter the aperture.
- Read the crop factor, the 35mm equivalent focal length and the equivalent aperture for depth of field.
To find a 35mm equivalent focal length, open the Archive.London crop factor calculator, choose the format the lens is used on and enter its focal length and aperture. Multiply by the crop factor shown: the tool gives the equivalent focal length and the equivalent aperture for depth of field. Exposure stays at the marked f-number.
What crop factor measures
Crop factor is the diagonal of the 35mm full frame, about 43.3 mm for a 36 x 24 mm frame, divided by the diagonal of the format in question. Formats smaller than 35mm have a factor above 1: Micro Four Thirds is 2.0 and most APS-C sensors are about 1.5. Formats larger than 35mm have a factor below 1: 6x7 film is close to 0.5, 4x5 inch sheet film is under 0.3.
Multiply the real focal length by the crop factor to get the lens that frames the same diagonal angle of view on 35mm. A 25mm lens on Micro Four Thirds frames like a 50mm. A 105mm lens on 6x7 also frames like a lens of roughly 50mm. The focal length itself never changes; only the area of the image circle that the format records is different.
Equivalent aperture applies to depth of field, not exposure
The calculator multiplies the f-number by the crop factor to give an equivalent aperture. This tells you which f-number on 35mm, at the equivalent focal length and the same shooting distance, would give similar depth of field and background blur. A 105mm f/2.4 lens on 6x7 behaves, for depth of field, like a 50mm lens at about f/1.2 on full frame. A 25mm f/1.4 on Micro Four Thirds behaves like a 50mm at f/2.8.
Exposure is a separate matter. An f-number describes light per unit area, so f/2.4 is f/2.4 on every format, and a hand-held meter reading or a Sunny 16 setting carries across unchanged. Never adjust shutter speed or ISO for the equivalent aperture. The larger format simply gathers more light in total because it has more area, which is one reason it tends to show less grain or noise.
Limits of the comparison
Equivalence by diagonal is a convenient approximation. Formats have different shapes: 35mm is 3:2, 6x7 and 4x5 are close to 5:4, 6x6 is square. Two systems with the same diagonal angle of view will not match across the width or the height, so if you plan to crop to a set shape, compare the relevant side instead.
Nominal film sizes are also rounded. A 6x7 frame is about 56 x 70 mm, with small differences between camera makers, and the image area of a 4x5 sheet is slightly less than the sheet itself. APS-C sensors vary from about 1.5 to 1.6. The figures here come from standard format dimensions and are estimates, good to within a few percent, which is closer than the tolerance on most marked focal lengths.
From the archive: reading medium format lenses in digital terms
Picture researchers and scanning technicians who learned on digital cameras often meet film formats through the kit that made the pictures. The archive inventory lists 6 x 7 colour transparency film as the principal analogue format of the Robert Harper Photograph Library, alongside 35mm slides and larger format film.
Knowing that a 6x7 frame has about four and a half times the area of a 35mm frame explains two practical points. It shows why a 165mm lens on that format is only a short portrait lens, and why each transparency rewards a high resolution scan. For organisations interested in the scanning side, the digitisation partners section sets out what the film holdings consist of.
Frequently asked questions
How do I calculate crop factor?
Divide the diagonal of a 35mm frame, about 43.3 mm, by the diagonal of your sensor or film frame. A Micro Four Thirds sensor of 17.3 x 13 mm has a diagonal of about 21.6 mm, giving a crop factor of 2.0. The calculator does this for each listed format using standard dimensions.
Does crop factor change the focal length of my lens?
No. Focal length is a physical property of the lens and stays the same on any camera. Crop factor only describes how much of the projected image the format records. A smaller format records a narrower slice, so the picture looks as if a longer lens had been used on 35mm.
Does a crop sensor change exposure?
No. Exposure depends on the f-number, shutter speed and ISO, and f/4 delivers the same light per unit area on every format. The equivalent aperture shown by the calculator is for comparing depth of field only. Keep using the marked f-number for metering and exposure settings.
What is the crop factor of medium format film?
It depends on the frame size. With typical frame dimensions, 6x4.5 is about 0.62, 6x6 about 0.55 and 6x7 about 0.5. A standard lens on 6x7 is therefore around 90 to 105mm. Digital medium format sensors are smaller than these film frames and have crop factors nearer 0.8.
Why can a crop factor be less than 1?
The factor is measured against 35mm full frame, so any format larger than 36 x 24 mm comes out below 1. A 150mm lens on 4x5 inch sheet film has a factor of roughly 0.28 and frames like a lens of about 42mm on 35mm. Large format lenses are long but not telephoto.
