Free image tools

Field of view calculator: angle of view and scene coverage

Enter a focal length and format to get the horizontal, vertical and diagonal angle of view, then add a distance to see how wide and how tall an area the frame will cover.

This tool needs JavaScript. It runs entirely in your browser; nothing is uploaded.

Private by design. Your files are processed by your own browser on your own device. They are not uploaded, stored or seen by Archive.London. Tool terms

How to use the Field of View Calculator tool

  1. Choose the sensor or film format.
  2. Enter the focal length of the lens.
  3. Read the horizontal, vertical and diagonal angle of view.
  4. Enter a distance to see the width and height of the scene covered there.

To work out a lens's field of view, open the Archive.London field of view calculator, choose your sensor or film format and enter the focal length. It shows the horizontal, vertical and diagonal angles of view. Enter a subject distance as well and it gives the width and height of the scene covered at that distance.

Planning a shot with angle of view and coverage

Angle of view tells you how much of the world a lens takes in; coverage turns that into metres at a given distance. Both are useful before you travel or hire kit. A 50mm lens on 35mm full frame sees about 39.6 degrees horizontally, 27 degrees vertically and 46.8 degrees across the diagonal. At 10 m it covers a scene about 7.2 m wide and 4.8 m tall.

Coverage scales in direct proportion to distance, so the same lens covers 3.6 m by 2.4 m at 5 m. Halving the focal length doubles the coverage but does not double the angle, because angle follows an arctangent, not a straight line. Use the coverage figures to check that a group, a building front or a painting on a wall will fit from the position you can actually stand in.

The geometry and where it stops being exact

For each side of the frame the calculator uses angle = 2 × arctan(d / 2f), where d is the frame width, height or diagonal and f is the focal length. Coverage at a distance is distance × d / f. These are the standard formulas for a rectilinear lens focused at infinity.

Three limits are worth knowing. Fisheye lenses use a different projection and see far more than the formula predicts. At close focus the lens extends, or shifts internal groups, and the true angle changes; at macro distances the error is large. Marked focal lengths are also rounded, so a lens sold as 24mm may be a little longer or shorter. Expect real results within a few percent for normal lenses at normal distances, and leave a margin at the edges of the frame.

From the archive: matching a viewpoint decades later

Rephotography, the practice of standing where an earlier photographer stood and repeating the view, depends on this arithmetic. If you know the format and can estimate the focal length, the angle of view tells you how far back the camera was. The reverse works too: the width of a known street or building gives a likely lens.

The photography archive index includes collections of London street scenes from the 1960s and 1970s and landscapes from Scotland and elsewhere, the kind of location work where such comparisons are made. Robert Harper's main film format was 6 x 7, so a rephotographer would start by selecting that format here. The site's photographers section is a further starting point for that kind of research.

Frequently asked questions

What is the difference between angle of view and field of view?

The terms are often used interchangeably. Strictly, angle of view is the angle the lens takes in, measured in degrees, while field of view is the size of the area covered at a given distance, measured in metres or feet. This calculator reports both: three angles, plus scene width and height at your chosen distance.

What focal length matches human vision?

There is no single answer. A lens near the format diagonal, about 43mm on 35mm full frame, gives natural-looking perspective at normal print sizes, which is why 50mm is called a standard lens. Human vision, with two moving eyes, takes in a much wider area, though only the centre is sharp.

Does the same lens give a different field of view on another camera?

Yes. Angle of view depends on both focal length and the size of the sensor or film. A 50mm lens gives about 47 degrees diagonally on full frame, about 32 degrees on a 1.5x APS-C sensor and about 24 degrees on Micro Four Thirds. Choose the right format in the calculator to see the change.

How far back do I need to stand to fit a subject in?

Enter your lens and format, then adjust the distance until the coverage width and height exceed the size of the subject with some margin. Because coverage is proportional to distance, you can also scale by hand: if the frame covers 3.6 m at 5 m, it covers 7.2 m at 10 m.

Is the result right for fisheye or zoom lenses?

It is right for zooms at whatever focal length is set, allowing for rounding in the marked figures. It is not right for fisheye lenses, which use a different projection and cover a far wider angle than a rectilinear lens of the same focal length. Close focusing also changes the true angle slightly.

Help digitise the archive

52,684 analogue originals, mostly medium-format transparencies, are waiting to be scanned and catalogued. We are speaking to scanning, cataloguing and tagging partners.

See the digitisation briefWrite to the archive