Free image tools

Convert film negatives to positive images

Invert photographed or scanned negatives into positives. Works with black-and-white film and with colour negative film, where the orange mask is removed using a sample of the film base.

This tool needs JavaScript. It runs entirely in your browser; nothing is uploaded.

Private by design. Your files are processed by your own browser on your own device. They are not uploaded, stored or seen by Archive.London. Tool terms

How to use the Film Negative to Positive Converter tool

  1. Choose your scanned or photographed negative, or drop it on the page.
  2. Select black-and-white or colour negative.
  3. For colour, use the automatic film-base sample or click the rebate to remove the orange mask.
  4. Adjust the per-channel levels, then brightness and contrast.
  5. Download the positive image.

To convert a film negative to a positive, open the Film Negative to Positive Converter on Archive.London and load your scan or camera photograph of the negative. Choose black-and-white or colour negative. For colour, let the tool sample the film base or click the rebate to remove the orange mask, then adjust levels, brightness and contrast and download.

Getting a clean inversion: capture and settings

The result depends heavily on the file you start with.

  • Include some rebate. Leave a strip of unexposed film edge in the frame. It gives the tool a true sample of the film base.
  • Use even, neutral light. A good light panel or a flatbed with a transparency unit is ideal. Mask off stray light around the film.
  • Expose generously without clipping. A negative is low in contrast, so make use of the range available.
  • Keep the film flat and clean. Dust appears as white specks once inverted.

After inversion, the per-channel levels set the black and white points of red, green and blue separately, which is where most colour casts are corrected. Finish with brightness and contrast. If the picture is laterally reversed, the film was captured from the wrong side and needs flipping.

Why colour negatives are orange, and how the mask is removed

Colour negative film has an orange-brown cast built in. It comes from coloured dye couplers in the emulsion, which compensate for imperfections in the film's own dyes and were designed for printing on photographic paper. A simple colour inversion of such a negative gives a strongly blue-cyan picture, which is why the general-purpose invert tool is not enough.

The remedy is to measure the colour of the film base, where no image was recorded, and neutralise it in each channel as part of the inversion. The tool can estimate the base automatically, or you can click the rebate, the clear edge beside the frame, to sample it directly. Different film stocks have different masks, so sample each roll.

Black-and-white negatives have no mask. They need inversion and a suitable setting of levels and contrast.

What a browser conversion can and cannot do

Processing happens in your browser. The negative is not uploaded and nothing is stored, so family negatives and unpublished work stay on your device.

The limits are those of the browser canvas. Output is 8-bit sRGB, and embedded metadata and colour profiles from the source file are not carried over. Eight bits per channel is fine for viewing, sharing and proofing, but a negative's tones are compressed into a narrow band, and stretching them leaves little room for heavy later editing. Skies and smooth gradients are where banding shows first.

For master files, capture in raw or 16-bit TIFF and invert in software that works at high bit depth. Use this tool for quick positives, checking what is on a roll, and deciding which frames deserve a full scan.

Negatives, transparencies and the work of reading a film archive

Not all film needs inverting. Transparencies, also called slides or reversal film, are already positive and should be scanned as they are. Negatives are the opposite, and until they are inverted even an experienced eye can struggle to judge expression, focus or colour. Traditionally the contact sheet did that job, giving a positive proof of every frame on a roll.

The Robert Harper Photograph Library is mostly medium-format colour transparencies, alongside black-and-white negatives and contact sheets, as described under analogue holdings. The background of the photographer who made them is on the Robert Harper biography page.

Frequently asked questions

Can I convert negatives using just my phone camera?

Yes, for viewing and sharing. Photograph the negative against an even white light source, such as a light panel or a tablet showing a white screen with a diffuser on top, keep the phone parallel to the film and include some of the film edge. Then load the picture into the tool. Resolution and colour accuracy will not match a dedicated scan.

Why does my inverted colour negative look blue?

The orange mask has not been removed. Inverting orange gives blue-cyan, so a plain inversion always produces that cast. Choose the colour negative mode and either let the tool sample the film base automatically or click on the rebate at the edge of the frame. Then fine-tune with the per-channel levels until neutral areas look neutral.

What is the rebate and why should I click it?

The rebate is the border of the film outside the picture area, often carrying frame numbers and the maker's edge markings. Between those markings it is unexposed, so it shows the pure colour of the film base and mask. Sampling it tells the tool exactly what colour to subtract. If no rebate is visible in your capture, use the automatic option.

Does this work for slides and transparencies?

Slides and transparencies are positive film, so they do not need inverting and this tool is not required for them. Scan or photograph them directly. If a scan of a transparency looks dull or has a cast, the Brightness and Contrast tool and the Image Histogram are more useful for assessing and correcting it.

Is the output good enough for printing?

For small prints and proofs, often yes, provided the capture was sharp and well exposed. The output is 8-bit sRGB, which limits how far you can adjust it afterwards without banding. For exhibition prints or archival masters, scan at high bit depth and invert in dedicated software, using this tool to choose which frames justify the effort.

Help digitise the archive

52,684 analogue originals, mostly medium-format transparencies, are waiting to be scanned and catalogued. We are speaking to scanning, cataloguing and tagging partners.

See the digitisation briefWrite to the archive