How to use the Pixels to Inches Converter tool
- Enter a value in pixels, inches, centimetres or millimetres.
- Set the PPI you are working to, for example 300 for photographic print.
- Read the converted values in the other units.
- Compare the sizes shown for common PPI values side by side.
To convert pixels to inches, divide the pixel count by the resolution in pixels per inch: 3000 pixels at 300 PPI is 10 inches, or 25.4 cm. The Archive.London pixels to inches converter does this in both directions for inches, centimetres and millimetres, and shows the result at several common PPI values.
The formula, and why a pixel has no fixed size
A pixel is a sample, not a length. It only gains a physical size when you decide how many of them to pack into each inch of paper or screen. That number is the resolution in pixels per inch (PPI), and the arithmetic is short:
- inches = pixels ÷ PPI
- pixels = inches × PPI
- 1 inch = 2.54 cm = 25.4 mm
So an image 3000 pixels wide is 10 inches at 300 PPI, 20 inches at 150 PPI and nearly 42 inches at 72 PPI. The file is the same in every case; only the spacing of the pixels changes. This is why a question such as 'how big is 1200 pixels?' has no answer until a PPI is given, and why the converter shows several common values together.
Which PPI to use: 72, 96, 150 or 300
The common figures each come from a different context:
- 300 PPI is the standard request for photographic reproduction in books and magazines, viewed at reading distance.
- 150 PPI is often adequate for posters and large prints seen from further away.
- 96 PPI is the reference value in web standards: CSS defines one inch as 96 CSS pixels.
- 72 PPI is a legacy screen figure, tied to the 72 points per inch of typography.
For screens, none of these describes a real device accurately. A phone packs in several hundred physical pixels per inch and a desktop monitor far fewer, so on-screen size depends on the display, not on a number stored in the file. For print, work backwards: multiply the print size in inches by the PPI your printer asks for to get the pixel dimensions you need.
From film frame to pixel dimensions
The same conversion runs in reverse when film is scanned. Scanner resolution is quoted in samples per inch of the original, so pixel dimensions are simply the size of the frame multiplied by that figure.
The principal analogue format in the Robert Harper Photograph Library is the 6 x 7 colour transparency, described on the analogue collection page. The image area of that format is nominally about 56 by 70 mm, or roughly 2.2 by 2.76 inches. Scanned at 2000 PPI it yields a file of about 4,400 by 5,500 pixels; at 4000 PPI, about 8,800 by 11,000. Divide those by 300 and you have the largest print that scan supports at full magazine resolution: around 29 by 37 inches in the second case. A 35mm frame, at 24 by 36 mm, gives far less to work with.
Frequently asked questions
How many pixels are in an inch?
There is no fixed number. It depends on the resolution you choose. At 300 PPI an inch contains 300 pixels; at 96 PPI, the reference value used in CSS for web pages, it contains 96; at 72 PPI it contains 72. Pick the PPI that matches your output, then multiply inches by that figure.
How many pixels is A4 at 300 PPI?
A4 measures 210 by 297 mm, which is about 8.27 by 11.69 inches. Multiplied by 300, that gives 2480 by 3508 pixels. At 150 PPI the same sheet needs 1240 by 1754 pixels. Add extra if the printer requires bleed, typically 3 mm on each edge in the UK.
Is PPI the same as DPI?
Not strictly, though the terms are used interchangeably in everyday speech. PPI counts the pixels of an image or screen per inch. DPI counts the ink dots a printer lays down per inch, and a printer uses many dots to render each pixel. When a publisher asks for '300 dpi', they almost always mean 300 pixels per inch at the printed size.
How do I convert pixels to centimetres?
Divide the pixels by the PPI to get inches, then multiply by 2.54. For example, 1500 pixels at 300 PPI is 5 inches, which is 12.7 cm. Going the other way, divide the centimetres by 2.54 and multiply by the PPI. The converter handles millimetres in the same way, using 25.4 mm per inch.
Does changing the PPI of an image change its quality?
Not by itself. Changing only the PPI value alters the size at which the image is intended to print and leaves the pixels untouched. Quality changes only if the image is resampled, meaning pixels are added or discarded. A 3000 pixel image is the same file whether it is labelled 72 or 300 PPI.
