Free image tools

Digitisation storage calculator for scanning projects

Estimate how much storage an archive digitisation project will need. Enter the number of items, the film format, scan ppi and bit depth to total the master TIFFs and JPEG derivatives, with a 3-2-1 backup multiplier.

This tool needs JavaScript. It runs entirely in your browser; nothing is uploaded.

Private by design. Your files are processed by your own browser on your own device. They are not uploaded, stored or seen by Archive.London. Tool terms

How to use the Digitisation Storage Calculator tool

  1. Enter the number of items to be scanned.
  2. Choose the film format and the scanning resolution in ppi.
  3. Select the bit depth for the master files.
  4. Read the totals for master TIFFs and JPEG derivatives.
  5. Apply the 3-2-1 backup multiplier to see the full storage requirement.

To estimate storage for a digitisation project, open the Digitisation Storage Calculator on Archive.London and enter the number of items, the film format, the scan ppi and the bit depth. It totals the storage for master TIFFs and JPEG derivatives and applies a 3-2-1 backup multiplier. The calculation runs in your browser and nothing is uploaded.

A worked example: ten thousand 35mm frames

The calculation multiplies four things: how many items, how large each is, how finely it is sampled and how many bits record each pixel.

Take 10,000 frames of 35mm film scanned at 4000 ppi in 16-bit RGB. Each frame is about 21.4 megapixels and each uncompressed master about 129 MB, so the masters total roughly 1.3 TB. JPEG derivatives for access add a small fraction of that. With three copies under the 3-2-1 rule, the project needs about 3.9 TB.

Now change one variable. The same 10,000 items as 4 × 5 inch sheets at 2000 ppi come to about 480 MB each and 4.8 TB of masters, before backups. Format drives the total more than anything else, which is why mixed collections should be estimated format by format and then added together.

Masters, derivatives and the 3-2-1 rule

A scanning project normally ends up with two classes of file. The master is the full-resolution capture, kept in a stable, well-documented format, usually TIFF, and never edited. Derivatives are smaller copies made from it for viewing, cataloguing and delivery, typically JPEGs. If a derivative is lost it can be regenerated. If a master is lost, the item must be scanned again, assuming the original still exists.

The 3-2-1 rule is the standard minimum for protecting masters: three copies of the data, on two different types of storage, with one copy held off-site. The calculator's multiplier turns the size of one set of files into the capacity needed for all of them.

Backups address loss. They do not detect silent corruption, so pair them with checksums recorded at creation and verified at intervals.

Costs the storage total does not show

The figure is a planning estimate, and several things sit outside it.

  • Headroom. Rescans, alternative versions, test files and working copies accumulate. Many projects allow a margin above the calculated total.
  • Compression. Estimates for masters assume full-size files. Lossless compression can reduce them, by an amount that varies with the images.
  • Growth and migration. Storage media age, so budget for replacement and for copying everything to new systems over time.
  • Transfer. Moving terabytes between sites or to cloud storage takes real time and bandwidth.
  • Metadata and cataloguing. These take little space and a great deal of labour.

The tool is a calculator. No files are involved, and the numbers you enter are processed in your browser and not sent anywhere.

Sizing a real film archive

Storage planning becomes concrete when applied to an actual collection. The Robert Harper Photograph Library records 52,684 analogue photographs in its inventory, mostly medium-format colour transparencies, with black-and-white negatives, contact sheets, larger-format film, 35mm slides and more than 4,000 Polaroid prints. The counts are given in the archive facts.

Medium-format originals produce files several times larger than 35mm at the same resolution, so the choice of scanning specification has a direct effect on infrastructure. The analogue material largely awaits digitisation, and organisations able to help with scanning, cataloguing or storage can find out more on the digitisation partners page.

Frequently asked questions

How much storage do I need to digitise a photo archive?

Multiply the number of items by the size of one master file, add derivatives, then multiply by the number of copies you will keep. As a guide, a 35mm frame at 4000 ppi in 16-bit is about 129 MB uncompressed, so 10,000 frames need about 1.3 TB for one set of masters and nearly 4 TB with three copies.

What is the 3-2-1 backup rule?

It is a widely used minimum standard for protecting data: keep three copies in total, store them on two different kinds of media or systems, and hold one copy in a different physical location. The aim is that no single failure, whether a faulty drive, a fire or a mistaken deletion, can destroy every copy at once.

Why store masters as TIFF and not JPEG?

TIFF can hold 16 bits per channel without lossy compression, so nothing captured by the scanner is discarded and the file can be corrected later without visible damage. It is an openly documented format with broad software support. JPEG is 8-bit and lossy, which suits access copies but not a master that may never be scanned again.

Does 16-bit scanning really double the storage?

Yes, for uncompressed files. A 16-bit file uses two bytes per channel for every pixel where an 8-bit file uses one, so the master is twice the size at the same pixel dimensions. Across a large collection this is a major budget line, which is why some projects reserve 16-bit capture for material that most benefits.

Can I use the calculator for prints and documents as well as film?

The format choices are film sizes, from 35mm to 8 × 10 inches, plus Polaroid, so it is aimed at photographic collections. The underlying method applies to any flat original: work out the pixel dimensions from physical size and ppi, multiply by bytes per pixel, then by quantity and by the number of copies.

Help digitise the archive

52,684 analogue originals, mostly medium-format transparencies, are waiting to be scanned and catalogued. We are speaking to scanning, cataloguing and tagging partners.

See the digitisation briefWrite to the archive