Free image tools

Digitisation time and cost calculator for scanning projects

Estimate how long an archive scanning project will take and what the labour may cost, from the number of items, capture and handling time, productive hours and operators. The results are planning estimates only.

This tool needs JavaScript. It runs entirely in your browser; nothing is uploaded.

Private by design. Your files are processed by your own browser on your own device. They are not uploaded, stored or seen by Archive.London. Tool terms

How to use the Digitisation Time and Cost Calculator tool

  1. Enter the number of items to be digitised.
  2. Enter the seconds per capture and the handling time per item.
  3. Set the productive hours per day and the number of operators.
  4. Optionally add an hourly cost.
  5. Read items per day, working days, calendar weeks and labour cost.

To estimate digitisation time, add the capture time and handling time per item, divide the productive seconds in a day by that figure to get items per day per operator, then divide the total items by daily output. The Archive.London digitisation calculator does this and adds calendar weeks and labour cost. Results are estimates.

The inputs that decide your schedule

Six figures drive the estimate, and two of them matter far more than the rest.

  • Number of items: count what will actually be captured. One strip of six negatives is six captures, and both sides of an annotated print are two.
  • Seconds per capture: the time the camera or scanner needs for one item.
  • Handling time per item: taking the item from its enclosure, cleaning, positioning, checking the capture and returning it. This is usually the larger number, and the one people underestimate.
  • Productive hours per day: time spent capturing, not the length of the shift.
  • Number of operators: each assumed to work at the same rate on a separate workstation.
  • Hourly cost: optional, for a labour figure.

Handling time and productive hours are the figures to measure, not guess. A small change in either moves the end date by weeks on a large collection.

How the estimate is worked out, with an example

The arithmetic is simple enough to check by hand:

  1. Time per item = seconds per capture + handling time.
  2. Items per day = productive seconds per day ÷ time per item, multiplied by the number of operators.
  3. Working days = number of items ÷ items per day.

Take 10,000 slides, 20 seconds per capture, 40 seconds of handling and 5 productive hours a day. Each item takes 60 seconds, so one operator completes 300 a day and the job needs about 34 working days. Two operators halve that to 17. Cut handling to 25 seconds and one operator manages 400 a day, finishing in 25 days.

The calculator then converts working days into calendar weeks and, if you entered an hourly cost, into a labour figure. Decide in advance whether that hourly figure should reflect the whole paid day or only productive time.

What the estimate leaves out

The calculator models capture and nothing else. A realistic project plan adds, at least:

  • Preparation: surveying, sorting, numbering, rehousing and conservation checks before anything reaches the camera.
  • Quality control: reviewing files, and rescanning the ones that fail.
  • Post-processing: cropping, inverting negatives, file naming, checksums and making access copies.
  • Cataloguing: captions, keywords and rights information, which often takes longer than capture.
  • Equipment and storage: cameras, scanners, holders, calibration targets, disks and backup.
  • Slippage: training, equipment faults, holidays and sickness.

Some of these can be folded into handling time if they happen per item at the workstation. The rest need their own lines in the budget. The most reliable way to firm up any estimate is a pilot: digitise a few hundred representative items, time the work honestly, and enter the measured figures.

Scale in practice: a large film archive

Estimates of this kind are the first thing a digitisation partner or funder asks for, and scale changes the answer more than any choice of equipment. The Robert Harper Photograph Library inventory lists 134,340 analogue frames across 503 folders, most of them medium-format transparencies. As pure arithmetic, at one minute per frame and five productive hours a day, a single operator would need about 448 working days, and two operators about 224. Those are illustrations, not a project plan: real rates depend on format, condition and selection, and not every duplicate or variant need be captured at master quality.

The figures behind that sum are on the archive facts page. Organisations with capture capacity or an interest in a joint project will find the brief on our digitisation partners page.

Frequently asked questions

How long does it take to scan 1,000 slides?

It depends on your method, but the sum is straightforward. At 30 seconds per capture plus 30 seconds of handling, each slide takes a minute, so 1,000 slides need about 16.7 hours of productive time. At five productive hours a day that is a little over three days, so allow four. Slow, high-resolution film scanners can take several minutes per frame.

How many productive hours should I assume per day?

Fewer than the length of the working day. Set-up, calibration, breaks, file transfers, fetching and returning boxes and solving problems all take time away from capture. There is no universal figure, and repetitive handling work is tiring, so measure it during a pilot. Being cautious here is wiser than being optimistic.

Does the cost include equipment, storage or cataloguing?

No. The cost shown is labour for capture only, based on the hourly figure you enter. Equipment purchase or hire, software, storage and backup, conservation supplies, quality control, metadata and project management are all separate. For a full budget, treat this figure as one line among several, and add a contingency.

Is camera capture faster than a scanner?

Often, yes. A digital camera on a copy stand records a frame in a fraction of a second, so the pace is set almost entirely by handling. Flatbed and dedicated film scanners take longer per item, particularly at high resolution, though some can batch several frames unattended. Enter the timings you measure on your own equipment.

Are the figures I enter stored or sent anywhere?

No. The calculation runs in your browser and the numbers stay on your device. Nothing is uploaded, saved or tied to an account, so you can test different scenarios freely. If you want a record, copy the results into your own project document before closing the page.

Help digitise the archive

52,684 analogue originals, mostly medium-format transparencies, are waiting to be scanned and catalogued. We are speaking to scanning, cataloguing and tagging partners.

See the digitisation briefWrite to the archive