How to use the Film Scan Resolution Calculator tool
- Choose the film format: 35mm, 6×4.5, 6×6, 6×7, 6×9, 4×5 in, 8×10 in or Polaroid.
- Enter the scanning resolution in ppi.
- Read the pixel dimensions, megapixels and maximum print size at 300 ppi.
- Check the uncompressed TIFF size at 8-bit and 16-bit.
- Alternatively, enter a target print size to find the ppi you need.
To work out film scan resolution, open the Film Scan Resolution Calculator on Archive.London, choose your film format, such as 35mm or 6×7, and enter the scan ppi. It returns pixel dimensions, megapixels, the maximum print size at 300 ppi and the uncompressed 8-bit and 16-bit TIFF size. You can also work backwards from a target print size.
Worked examples for common film formats
The arithmetic is simple: pixels equal the film dimension in inches multiplied by the scan ppi. A calculator saves the unit conversion.
A 35mm frame is 24 × 36 mm. At 4000 ppi it yields about 5669 × 3780 pixels, or 21.4 megapixels. That prints at roughly 18.9 × 12.6 inches at 300 ppi. The uncompressed RGB TIFF is about 64 MB at 8 bits per channel and about 129 MB at 16 bits.
A 4 × 5 inch sheet at 2000 ppi gives 8000 × 10,000 pixels, 80 megapixels, with a 16-bit TIFF of about 480 MB.
Working backwards, an A3 print at 300 ppi needs about 4961 pixels on its long side. From 35mm film that requires a scan of roughly 3500 ppi.
Medium-format frame sizes vary slightly between cameras, so treat results for 6×6, 6×7 and similar as close estimates.
Bit depth, file size and why masters are so large
An uncompressed TIFF stores every pixel in full. File size is therefore pixel count multiplied by the number of channels and the bytes per channel: three bytes per pixel for 8-bit RGB, six for 16-bit RGB. Doubling the ppi quadruples the pixel count and the file size. Moving from 8-bit to 16-bit doubles it again.
Sixteen-bit capture is preferred for masters because it records far more tonal steps per channel, which protects shadow and highlight gradation when the file is corrected later. Eight-bit is adequate for access copies and for files that will not be edited heavily.
The figures here are for uncompressed data. Lossless TIFF compression reduces them by a variable amount, depending on the image.
This is a calculator. No image is loaded, and the numbers you enter are processed in your browser and not sent anywhere.
How much resolution is enough? Published guidance
More ppi is not always more picture. Beyond a certain point a scan records film grain and the limits of the lens that took the photograph, at considerable cost in storage.
A widely cited reference is the US Federal Agencies Digital Guidelines Initiative (FADGI). Its 2016 Technical Guidelines for Digitizing Cultural Heritage Materials grades quality from one to four stars. For photographic transparencies from 35mm up to 4 × 5 inches, it lists 1000, 2000, 3000 and 4000 ppi for one to four stars, with 16-bit capture at three and four stars. For transparencies larger than 4 × 5 inches, the figures are 500, 1000, 1500 and 2000 ppi.
A third edition was published in 2023. Consult the current text before fixing a project specification, since star ratings also cover tone, colour accuracy and sharpness, not ppi alone.
Planning scans across a mixed-format archive
Real archives rarely hold one format. A specification that suits 35mm slides produces unmanageable files if applied unchanged to sheet film, and a setting chosen for sheet film undersamples small frames. Working through each format in turn, with the intended uses in mind, is the first step in any digitisation plan.
The Robert Harper Photograph Library illustrates the range: mostly medium-format colour transparencies, with 35mm slides, larger-format film, black-and-white negatives and more than 4,000 Polaroid prints. Most of this material has yet to be scanned. Organisations with scanning and cataloguing expertise can read about the project on the digitisation partners page.
Frequently asked questions
What resolution should I scan 35mm film at?
It depends on the use. Around 2000 ppi gives about 5 megapixels, enough for screens and small prints. Around 4000 ppi gives about 21 megapixels and is a common choice for archival masters, matching the four-star figure for small transparencies in the 2016 FADGI guidelines. Higher settings mainly enlarge the grain unless the scanner's optics resolve that much in practice.
How many megapixels is a 35mm negative?
Film has no fixed pixel count. The figure depends on the scanning resolution: a 24 × 36 mm frame gives about 5.4 megapixels at 2000 ppi and about 21.4 megapixels at 4000 ppi. How much real detail those pixels hold depends on the film stock, the lens, the focus and the exposure of the original photograph.
Is the ppi stated by a scanner the same as its real resolution?
Not necessarily. The stated figure is the sampling rate, meaning how many pixels are recorded per inch. The detail resolved depends on the scanner's lens, focus and sensor, and can be lower than the sampling rate suggests, particularly on flatbed scanners. The calculator works from the sampling rate, so its pixel and file-size figures are exact while resolved detail is a separate matter.
Should I scan in 8-bit or 16-bit?
Use 16-bit for master files you intend to keep and correct, since the extra tonal precision survives adjustments to levels and colour without banding. Use 8-bit for access copies or where storage is tight and no heavy editing is planned. A 16-bit file is twice the size of the 8-bit equivalent, which the calculator shows side by side.
How large can I print from a medium-format scan?
Divide the pixel dimensions by the print ppi. A 6×7 frame scanned at 3200 ppi gives roughly 7000 × 8800 pixels, which is about 23 × 29 inches at 300 ppi, and larger at lower densities for prints viewed from a distance. Enter your own format and ppi to get the exact figures, or enter the print size to find the scan you need.
