How to use the Change Image DPI tool
- Choose a JPEG or PNG, or drop it on the page.
- Enter the DPI value you need, for example 300.
- Apply the change. Pixel dimensions are not altered.
- Download the file and check it against the requirement you were given.
To change an image's DPI, open the Change Image DPI tool on Archive.London, drop in a JPEG or PNG and enter the value you need, such as 300. The tool rewrites the resolution recorded in the file header without resampling, so pixel dimensions and quality stay the same. Download the result. Nothing is uploaded.
DPI is a label, pixels are the picture
An image file is a grid of pixels. The DPI value stored alongside is an instruction about how densely to place those pixels on paper, nothing more. Strictly it is PPI, pixels per inch, but the two terms are used interchangeably for files.
Changing the label changes the nominal print size and leaves the content alone. A 3000 × 2000 pixel image marked 72 dpi has a nominal size of 41.7 × 27.8 inches. Marked 300 dpi, the same pixels have a nominal size of 10 × 6.7 inches. No detail has been added or removed.
So this tool is the right answer when a form, printer or journal insists on 300 dpi and your file already has enough pixels. It is the wrong answer if the file is too small. Relabelling a 600 × 400 image as 300 dpi produces a two-inch print.
What is rewritten in JPEG and PNG files
In a JPEG the tool sets the density fields of the JFIF header, which hold horizontal and vertical resolution and a unit. In a PNG it writes the pHYs chunk. PNG stores resolution in pixels per metre, so 300 ppi is recorded as 11,811.
Because the value is set without resampling, no pixel is recalculated. Dimensions stay the same and file size barely changes.
One caveat: a JPEG can record resolution in more than one place. Some programs read the resolution tags in an EXIF block in preference to the JFIF header. If a particular application still reports the old figure after you have changed it, that is the likely cause, and the picture itself is unaffected.
The file is processed in your browser and is not uploaded.
Meeting a '300 dpi' requirement properly
When a publisher asks for 300 dpi, what they need is enough pixels for the printed size. Work it out first: multiply each printed dimension in inches by 300. A 5 × 7 inch reproduction needs 1500 × 2100 pixels. A full A4 page needs about 2480 × 3508.
If your file meets the pixel count, set the DPI here and send it. If it falls short, you have three honest options: print smaller, accept a lower density such as 200 to 240 ppi, or obtain a larger original. Enlarging the file by interpolation will satisfy an automated check but adds no real detail.
For scans, leave the DPI at the value the scanner recorded wherever you can. It documents the sampling rate and allows the physical size of the original to be calculated later.
Resolution labels on files from a film archive
A scan from film carries two useful facts in one number. A 35mm frame scanned at 4000 ppi is recorded as 4000 dpi, which tells a future user both how it was captured and that the original was about 24 × 36 mm. Derivative copies made for print are often relabelled at 300 dpi so that layout software places them at a sensible size.
That is why a master file and a delivery file made from the same transparency can have identical pixels and different DPI values. Neither is wrong. Publishers and researchers who need files prepared to a specification can raise it when enquiring through professional access to the Robert Harper Photograph Library.
Frequently asked questions
Does changing the DPI improve image quality?
No. The DPI value is metadata that tells software how large to print the existing pixels. Changing it adds no detail and removes none. An image with too few pixels for the intended print size will look just as soft after relabelling. Quality depends on pixel dimensions, sharpness and compression, none of which this tool alters.
How do I convert an image from 72 dpi to 300 dpi?
Drop the file into the tool, enter 300 and download the result. The pixel dimensions remain the same, so the nominal print size becomes smaller: an image that was 10 inches wide at 72 dpi is 2.4 inches wide at 300 dpi. Check that the file has enough pixels for the size at which it will be printed.
Will the file be recompressed or resized?
The tool sets the recorded DPI value without resampling, so the image keeps its pixel dimensions and nothing is scaled up or down. Only the resolution field in the file header is changed. Supported formats are JPEG, through the JFIF density fields, and PNG, through the pHYs chunk.
Why does Photoshop or another program still show the old DPI?
A JPEG may store resolution both in its JFIF header and in EXIF tags, and some applications give priority to the EXIF values. This tool sets the JFIF density. If a program reports a different figure, it is probably reading the EXIF block. The pixels are identical either way, and you can set the resolution in that program without resampling.
What DPI should I use for web images?
It does not matter. Browsers display images according to their pixel dimensions and the page's layout, and ignore the recorded DPI. The old convention of 72 dpi for screens has no effect on how a picture appears online. Concentrate on pixel dimensions and file size instead, and keep the DPI field for print workflows.
