How to use the Image Size and Info tool
- Choose an image or drop it on the page.
- Read the pixel dimensions, megapixels and aspect ratio.
- Check the file size, format and the DPI value if one is recorded.
- Use the print sizes at 300, 240 and 150 ppi to judge whether the file is large enough.
To check an image's size, open the Image Size and Info tool on Archive.London and drop in a file. It shows the pixel dimensions, megapixels, aspect ratio, file size, format and any recorded DPI, plus the print size at 300, 240 and 150 ppi. The file is read in your browser and is not uploaded.
Which number answers which question
Each figure settles a different practical matter.
- Pixel dimensions are the real size of the image. A publisher's request for a file at least 3,000 pixels on the long edge is answered here and nowhere else.
- Megapixels are width multiplied by height, divided by one million. A 6000 × 4000 image is 24 MP.
- Aspect ratio tells you whether the picture will fit a layout without cropping. 6000 × 4000 simplifies to 3:2.
- File size matters for upload limits and email. It reflects compression as much as content.
- Format is read from the file, which is useful when an extension has been changed.
- DPI, where recorded, is only a label for print scaling.
If a submission portal rejects your picture, compare these values with the stated requirements to see which one is at fault.
Print size at 300, 240 and 150 ppi
Print size is pixel count divided by pixels per inch. The tool does the division at three common densities.
300 ppi is the usual specification for books, magazines and fine prints viewed in the hand. 240 ppi is widely accepted for good photographic prints. 150 ppi suits posters and large prints seen from further away.
A 6000 × 4000 pixel file therefore prints at 20 × 13.3 inches at 300 ppi, 25 × 16.7 inches at 240 ppi and 40 × 26.7 inches at 150 ppi. In metric terms the first of those is about 51 × 34 cm.
These are guides to comfortable quality, not hard limits. A sharp, well-exposed image tolerates more enlargement than a soft or heavily compressed one, and viewing distance counts for as much as the number.
Why the recorded DPI can be missing or misleading
The DPI shown is whatever value has been written into the file's header. It does not describe the picture's quality or detail, and changing it does not alter a single pixel. A 6000 × 4000 image labelled 72 dpi contains exactly the same information as one labelled 300 dpi.
Many files have no value at all. Screenshots, web images and pictures passed through social platforms often omit it, and software then assumes a default such as 72 or 96. Scanners are the main exception: a scan's DPI records the sampling rate used, which lets you work back to the physical size of the original.
The tool reads the file locally in your browser. Nothing is uploaded, so it is safe to check unpublished material.
Checking a file against a picture desk's specification
Publishers and agencies usually specify deliveries in pixels or megapixels, sometimes with a minimum file size as a rough proxy for quality. Checking a file before sending it avoids the familiar exchange in which a low-resolution preview is submitted in place of the full scan.
The same check works in reverse for picture researchers, who need to know whether a supplied file will hold up at the size a layout demands, whether a full-page bleed or a small inset. How the Robert Harper Photograph Library works with picture desks, and what can be supplied from scanned and unscanned material, is explained on the page for picture agencies.
Frequently asked questions
How do I find out how many pixels my image is?
Drop the file into the tool and it shows the width and height in pixels straight away, together with the megapixel total. These are read from the image itself, so they are reliable even if the file has been renamed. On a phone, choose the picture from your photo library when prompted.
What does it mean if no DPI is shown?
The file has no resolution value recorded in its header, which is common for web images, screenshots and files exported with metadata removed. It is not a fault and has no effect on quality. Print size is determined by the pixel dimensions and the ppi you choose to print at. You can add a value with the Change Image DPI tool if a form demands one.
Is my image big enough to print at A4?
A4 is 210 × 297 mm. At 300 ppi that needs about 2480 × 3508 pixels, and at 150 ppi about 1240 × 1754. Compare those figures with the pixel dimensions shown, or read the print sizes the tool lists. If your file is somewhat short of the 300 ppi figure it will usually still print acceptably.
Why is my file size large when the dimensions are small?
File size depends on format and compression as well as pixel count. A PNG or TIFF stores data losslessly and can be many times larger than a JPEG of the same dimensions. Detailed or noisy pictures compress less well than smooth ones, and embedded metadata, colour profiles and previews also add weight.
Does checking an image change or upload it?
No. The tool only reads the file, in your browser, on your device. It is not altered, uploaded or stored, and no account is needed. You can confirm this by loading the page, disconnecting from the internet and using the tool offline.
