Analogue craft

Why studios shot medium-format transparencies

A smiling woman with an updo and a pendant necklace against a black background.
Studio portrait.Photograph by Robert Harper. Robert Harper Photograph Library, Archive.London. From the archive, shown for illustration.

For decades the standard currency of magazine and advertising photography was a sheet of positive film a few centimetres across. The reasons were practical, and they still shape how film archives are scanned.

A medium-format transparency is a positive colour image on a piece of film about six centimetres across. You hold it to the light and the picture is simply there: no printing, no inversion, no interpretation. That one property, combined with a frame several times larger than 35mm, is why it became the working standard of studio, fashion and advertising photography for most of the later twentieth century.

More than half of the Robert Harper Photograph Library is analogue, and its inventory describes that material as mostly medium-format colour transparencies. This article explains the general craft and commercial logic behind the format. It does not describe Robert Harper's own equipment or methods, which the inventory does not record.

What exactly is a transparency?

Most film produces a negative, from which a positive print is made. Reversal film, known as transparency, slide or chrome, is processed so that the film itself ends up as the positive. The piece of film that was in the camera is the finished original.

Medium format means the film is 120 roll film, a size Kodak introduced in 1901. The film is about 61 mm wide, with an image height of about 56 mm. How long each frame is depends on the camera:

Nominal format Image area (mm) Frames per 120 roll Area compared with 35mm
35mm (for comparison) 24 × 36 36 per cassette 1×
6×4.5 56 × 41.5 15 or 16 about 2.7×
6×6 56 × 56 12 about 3.6×
6×7 56 × 70 10 about 4.5×
6×9 56 × 84 8 about 5.4×

Ten or twelve frames a roll sounds meagre beside thirty-six. In a studio it was a reasonable trade.

Why did the bigger frame matter?

Enlargement. To fill a magazine page, a 35mm frame has to be magnified about eight times along each side. A 6×7 frame needs about four. Less magnification means finer apparent grain, smoother tone and more room to crop. For still life, where an art director might want a watch face to hold up across a double-page spread, that margin was the difference between acceptable and excellent.

Shape mattered as well. The 6×7 frame has the same 4:5 proportion as a 10 × 8 inch print and is not far from the shape of a magazine page, so little of the film area was wasted. The square 6×6 frame left the cropping decision to the layout: the same original could run upright or landscape.

There was also a handling advantage. A 6×7 transparency is large enough to assess with the naked eye on a lightbox and comfortable to examine under a loupe. Editors could lay a whole shoot out on a lightbox in sleeves and edit by looking.

Why transparency and not negative?

Because a transparency is its own reference. When a picture went to the repro house, the scanner operator and later the printer had a physical object to match: this red, this skin tone, this density in the shadows. A colour negative offers no such agreement. Its tones are reversed, it carries an orange mask, and its colour is settled only when someone prints it.

For that reason colour transparency was the preferred original for publication until about the mid-1990s. Clients, art directors and picture desks expected it. A photographer working for magazines and advertising delivered transparencies because that was what the production chain was built to receive.

What was the catch?

Exposure. Negative film forgives; transparency film does not. It has much less latitude, so an error of half a stop is visible and a stop is usually fatal, particularly in the highlights, which wash out to clear film with nothing recoverable. And there was no darkroom stage at which to fix it. The film from the camera was the product.

Studio practice was organised around that fact:

  • Metering and lighting ratios were measured, not guessed.
  • Instant-film tests were made through the same camera before committing to film. Our article on Polaroid proofing in the studio describes how.
  • Bracketing meant shooting the same set-up at small exposure steps either side of the metered value, so that one frame would be exactly right.
  • Clip tests let a laboratory process a short piece of a roll first, then adjust development for the rest.

Bracketing is one common reason film archives hold more frames than distinct pictures. The Robert Harper Photograph Library's inventory counts 95,487 unique photographs and 177,143 frames once duplicates and variants are included; it does not yet break down how many of those variants are exposure brackets as opposed to alternative compositions. The counts are from the inventory and have not been checked frame by frame against the physical material.

How was the film processed?

Two families of colour reversal film dominated. Kodachrome, introduced in 1935, had a distinctive look and excellent keeping qualities but needed a complex process run by a small number of specialist plants; it was discontinued in 2009. Ektachrome and its many competitors used chemistry that an independent professional laboratory could run. Kodak released the E-6 version of that process in the mid-1970s, and it became the industry standard that reversal film still uses.

For working studios the consequence was speed. In a city with professional laboratories, film could be developed the same day, so a photographer could see results, and if necessary reshoot, while a set was still standing. That turnaround is a large part of why E-6 materials became the staple of studio work.

Why the system camera mattered

Medium-format studio cameras were generally modular: a body, interchangeable lenses, and detachable film backs. The backs mattered more than they sound. A photographer could load several in advance, change film type mid-shoot without finishing a roll, and swap in an instant-film back to proof the lighting through the taking lens. The combination of a big transparency, a repeatable test and a quick laboratory turnaround was a complete production method, and it lasted until digital backs began to do all three jobs at once.

What does this mean for scanning an archive today?

Medium-format transparencies are, in principle, among the most rewarding originals to digitise. The frame is large, the image is already positive, and the colour the photographer and client approved is visible on the film as a guide. A 6×7 frame scanned at 4,000 pixels per inch yields roughly 8,800 by 11,000 pixels. The free film scan resolution calculator gives pixel dimensions, print sizes and uncompressed file sizes for each format, and the digitisation storage calculator scales that up to a whole collection.

In practice there are things to watch. Dyes can shift with age and storage, so the film is a guide to colour, not a guarantee. Dense shadows in transparency film test a scanner's dynamic range. Film that is not held flat goes soft at the edges. And every decision multiplies: a few megabytes more per frame is a serious sum across tens of thousands of frames. No claim is made here about the condition of any particular transparency in the Harper archive; that is something scanning itself will establish.

Where the archive's transparencies sit

The analogue photography collection at Archive.London records 52,684 unique analogue photographs: mostly medium-format colour transparencies, with black-and-white negatives, contact sheets, larger-format film, 35mm slides and more than 4,000 Polaroid prints. They come from approximately thirty-five years of work, including more than fifteen years of regular contributions to Elle and The Telegraph Magazine, and they cover subjects from fashion to jewellery and fragrance. More than half of the archive is still on film and has yet to be scanned, and only a small selection has been published online by Archive.London.

For a broader comparison of roll and sheet sizes, see film formats explained.

Working on the transparencies

Archive.London is looking for scanning, cataloguing and conservation specialists to help bring this material into view, box by box. If your organisation digitises medium-format film at volume, the digitisation partners page sets out what the archive holds and how to start a conversation.

Frequently asked questions

What is medium format transparency film?

It is colour reversal film in the 120 roll size, about 61 mm wide, which produces a positive image on the film itself instead of a negative. Depending on the camera, a roll gives frames of 6×4.5, 6×6, 6×7 or 6×9 cm. It is also called slide film or chrome, and it is developed in the E-6 process.

Why did magazines prefer transparencies to negatives?

A transparency shows the finished picture. A picture editor could assess colour, sharpness and expression on a lightbox, and the printer had a physical reference to match. A colour negative has to be interpreted through printing, with reversed tones and an orange mask, so there is no single agreed original to check the reproduction against.

How much bigger is medium format than 35mm?

A 35mm frame is 24 × 36 mm, or 864 square millimetres. A 6×6 frame is about 56 × 56 mm, roughly 3.6 times the area, and a 6×7 frame about 56 × 70 mm, roughly 4.5 times. For a given size on the page the larger frame needs less enlargement, so grain is finer and detail holds better.

What resolution should a medium-format transparency be scanned at?

It depends on the purpose. As an illustration, a 6×7 frame scanned at 4,000 pixels per inch gives a file of roughly 8,800 by 11,000 pixels, about 97 megapixels; at 2,400 pixels per inch it gives about 35 megapixels. Archive.London's scan resolution calculator works out pixel dimensions and file sizes for each film format.

Is transparency film still made?

Yes, in a narrower range than before. Kodak discontinued its Ektachrome films by 2013 and reintroduced Ektachrome in 35mm in September 2018. Reversal film is still processed in E-6 chemistry by specialist laboratories. For professional publishing, though, digital capture replaced transparency from the mid-1990s onwards.

Sources

Published by Archive.London. Corrections are welcome under our editorial policy.

Help digitise the archive

52,684 analogue originals, mostly medium-format transparencies, are waiting to be scanned and catalogued. We are speaking to scanning, cataloguing and tagging partners.

See the digitisation briefWrite to the archive