How to use the Exposure Value (EV) Calculator tool
- Enter the aperture as an f-number.
- Enter the shutter speed.
- Enter the ISO.
- Read the exposure value, then pick any row from the table of equivalent exposures.
To calculate exposure value, open the Archive.London EV calculator and enter the aperture, shutter speed and ISO. It returns the exposure value and lists equivalent exposures at other apertures, so you can trade depth of field against motion blur without changing the brightness of the picture. Results are estimates from the standard formula.
How to use EV and the equivalent exposure table
Exposure value is a single number for a combination of aperture and shutter speed: EV = log2(N² / t), where N is the f-number and t the shutter time in seconds. EV 0 is f/1 for one second. Each step up of 1 EV halves the light reaching the film or sensor, which is one stop.
Many pairs share the same EV. f/16 at 1/125 is about EV 15, and so are f/11 at 1/250, f/8 at 1/500 and f/5.6 at 1/1000. The table lists these alternatives so you can choose on other grounds: a wide aperture for a soft background, a small one for depth of field, a fast shutter to freeze movement or a slow one to blur it. The exposure is the same in every row; the picture is not.
Where ISO fits, and why numbers are rounded
Strictly, EV describes only aperture and shutter. ISO decides which level of light that setting suits. Published EV charts for lighting conditions assume ISO 100: full sun is around EV 15, a bright interior nearer EV 7 or 8. Each doubling of ISO lets you use a setting 1 EV higher in the same light, so a scene metered at EV 12 for ISO 100 takes an EV 14 setting at ISO 400.
Marked values on cameras are rounded names for a precise series. f/5.6 is really 5.66, f/11 is 11.3, and 1/125 sits in a doubling sequence where the true figure is 1/128. Calculated EVs therefore land slightly off whole numbers, and the differences are far smaller than anything visible. With film, exposures of a second or longer may need extra time for reciprocity failure, which this formula does not include.
From the archive: exposure before the histogram
Colour transparency film has little tolerance for exposure error, often around half a stop either way, and what was exposed is what you get: there is no print stage to correct it. Photographers working on transparency material metered carefully and bracketed, and in studio practice instant prints were widely used to check lighting and exposure before the film was committed.
The Robert Harper Photograph Library holds mostly medium format colour transparencies on the film side, along with more than 4,000 individual Polaroid prints. The EV scale was the common language between meter, lens and shutter throughout that period. Articles on film, formats and archive practice appear in the journal.
Frequently asked questions
What is exposure value in photography?
Exposure value, or EV, is a number that stands for all aperture and shutter speed pairs giving the same exposure. It is defined as the base 2 logarithm of the f-number squared divided by the shutter time in seconds. A change of 1 EV equals one stop, a halving or doubling of light.
Is a higher EV brighter or darker?
As a camera setting, a higher EV admits less light: a smaller aperture, a faster shutter or both. As a description of a scene at ISO 100, a higher EV means a brighter scene, because brighter light needs a setting that admits less. Full sun is about EV 15; a dim interior is in single figures.
What are equivalent exposures?
They are different aperture and shutter pairs that deliver the same total exposure. Opening the aperture one stop while halving the shutter time leaves exposure unchanged. f/8 at 1/250 and f/5.6 at 1/500 are equivalent. The pairs differ in depth of field and motion blur, which is the reason to choose between them.
How does ISO affect exposure value?
ISO does not change the EV of a given aperture and shutter pair. It changes which pair gives correct exposure in the light you have. Raising ISO from 100 to 400 is two stops, so in the same light you can use a setting 2 EV higher, for example a shutter speed four times faster.
Can I use this instead of a light meter?
Not by itself. The calculator converts settings into EV and back; it does not measure light. You still need a reading from a camera, a hand-held meter or a phone app, or an estimate from a rule such as Sunny 16. Once you have one correct exposure, the table gives the alternatives.
