Three words cover almost everything in a box of old film. Two of them mean the same kind of object, and the third is its opposite.
A transparency is a positive image on film. A slide is a transparency in a mount. A negative is the reverse of both: an image in which light and dark, and in colour film the hues as well, are inverted. So the real division is between two kinds of film, positive and negative, and "slide" is a word about packaging. Knowing which you are holding matters, because the two kinds were shot differently, were processed in different chemistry and call for different handling at the scanner.
Slide vs negative: the short comparison
| Slide or transparency | Colour negative | Black-and-white negative | |
|---|---|---|---|
| Image on the film | Positive, natural colour | Reversed tones and hues, orange cast | Reversed tones, grey |
| Film type | Reversal film | Colour negative film | Black-and-white negative film |
| Usual process | E-6 (Kodachrome: K-14) | C-41 (older films: C-22) | Conventional silver development |
| What forms the image | Dyes | Dyes | Metallic silver |
| Intended next step | Viewing, projection or reproduction | Printing on colour paper | Printing on black-and-white paper |
| Exposure latitude | Narrow | Wider | Wide |
| Typical storage | Mounts in boxes or pages; sleeves | Strips in sleeves | Strips in sleeves, often with a contact sheet |
What is the difference between a slide and a transparency?
Usage, mostly. Reversal film produces a positive on a transparent base, and any such image is a transparency. Put a 35mm frame in a 2 x 2 inch card or plastic mount so that a projector can take it and it becomes a slide. Photographers working on 120 roll film or sheet film seldom mounted their work for projection, so those larger positives are normally called transparencies. Families had slides; picture libraries had transparencies; the film was the same. A fuller account is in what is a transparency? Slide film explained.
What is a negative, and why is a colour negative orange?
A negative records brightness in reverse. Where the scene was bright, more silver or dye forms and the film is dark; where the scene was dark, the film stays clear. Printing onto paper that behaves the same way reverses the tones a second time and gives a positive.
In black-and-white film the image is made of metallic silver in gelatin. In colour negative film it is made of three dye layers, and the hues are reversed as well as the tones, so a blue sky records as a yellowish orange. The overall orange tint is deliberate. In Kodak's C-41 process, introduced in 1972 to replace C-22, nearly all films include a mask formed by leftover dye couplers. It offsets the fact that the magenta dye absorbs some blue light and the cyan dye some green. Colour printing paper was designed around that mask. A scanner or a piece of software has to take it out, which is what the orange-mask option does in the film negative to positive converter.
A third kind sits between the two: chromogenic black-and-white film, such as Ilford XP2 Super, which is developed in C-41 chemistry and forms its image in dye. It looks like a black-and-white negative but behaves like a colour one in a scanner, a point that matters for dust removal.
How do you tell slides and negatives apart?
Light and a moment's attention are enough.
- Look through it. A natural-looking picture is a transparency. Reversed tones mean a negative.
- Look at the base colour. Orange or brown film is colour negative. Neutral grey is black-and-white. Clear film with a full-colour image is reversal film.
- Look at the packaging. Mounted frames are slides. Strips of four to six frames in sleeves are usually negatives, though uncut reversal film was also filed in strips.
- Look at the edge. Manufacturers printed names and codes along the film rebate, and these often identify the stock.
- Look for a companion. Black-and-white negatives were routinely filed with a contact sheet, a same-size print of the whole roll. How to read a contact sheet explains the marks on them.
Do slides and negatives need different scanning?
Yes, in three ways.
Colour reference. A transparency can be laid beside its scan and compared. FADGI's guidelines (third edition, May 2023) say the tonal scale and colour balance of the digital image should match the original transparency. A negative offers no such check. The same document says plainly that it is impossible to visualise the correct colour of a colour negative, and that there is no reliable way to reproduce how a print from it would have looked.
Workflow. For negatives, FADGI recommends scanning the film as if it were a transparency, taking care that neither highlights nor shadows are clipped, and keeping that as the archival master. Inversion to a positive, with adjustment to taste, happens in a separate production master. How to scan black-and-white negatives takes that workflow step by step.
Density and dust. Transparencies carry very dense shadows, close to 4.0 at their darkest by FADGI's account, which few scanners record cleanly. Negatives are thinner and easier in that respect. Infrared dust and scratch removal works on dye images, so it helps with slides and colour negatives, but not on conventional silver black-and-white film, where the silver itself blocks infrared.
For resolution the standards treat all three alike: about 3,000 pixels per inch for FADGI three stars and 4,000 for four, for film between 35mm and 4 x 5 inches. The film scan resolution calculator turns that into pixels for any format, and how to scan 35mm slides: four methods compared weighs up the equipment.
Do slides and negatives need different storage?
The principles are shared: cool, dry, dark, in chemically stable enclosures. Two differences are worth knowing. Colour dyes, in slides and colour negatives alike, fade with heat even in the dark, which is why the Library of Congress recommends low-temperature storage for colour materials. And The National Archives in Kew advises storing film negatives apart from other photographs, because some negatives give off acidic gases as they age.
All three in one archive
A working photographer's archive usually contains every kind, because each had a job. The Robert Harper Photograph Library's inventory lists 6 x 7 colour transparency film as its principal analogue format, with 35mm slides, black-and-white negatives, contact sheets, larger-format film and 4,005 Polaroid prints. In all it records 52,684 unique analogue photographs, a count that comes from the inventory and has not been checked frame by frame against the physical material. More than half of the archive is still on film and has yet to be scanned.
The holdings are described in the analogue collections and listed folder by folder in the archive inventory. Scanning and cataloguing specialists who work with mixed film collections are invited to introduce themselves through the digitisation partners page.
Frequently asked questions
What is the difference between a slide and a negative?
A slide is a positive: it shows the scene with correct tones and colours when you hold it to the light, and it is usually in a 2 x 2 inch mount. A negative shows the scene reversed, with light areas dark, and colour negatives have an overall orange tint. A slide is a finished picture; a negative is an intermediate that must be printed or inverted.
Are slides and transparencies the same thing?
They are the same kind of film. Transparency is the general word for a positive image on film in any size. Slide usually means a 35mm transparency in a mount made for projection. Larger transparencies, from 120 roll film or sheet film, were normally kept unmounted in sleeves, and the trade tended to call those transparencies or chromes.
Why are colour negatives orange?
The orange colour is a mask built into almost all colour negative films. The magenta and cyan dyes that form the image absorb some light they should not, and leftover dye couplers in the unexposed areas are coloured to cancel that error. Printing paper was formulated to allow for the mask. Scanning software has to remove it during inversion.
Which is better to scan, slides or negatives?
Neither is simply better. A slide can be compared with its scan, so colour has a reference, but its dense shadows are hard for scanners. A negative has a lower density range and holds more exposure latitude, but there is no agreed correct rendering, so inversion involves judgement. Good practice is to capture both without clipping and interpret later.
How do I tell what kind of film I have?
Hold it up to an even light. If the picture looks natural, it is a transparency. If tones are reversed and the film is orange or brown, it is a colour negative. If it is grey and reversed, it is a black-and-white negative. Mounted 35mm frames are almost always slides. Printed edge markings often name the film.
Sources
- Wikipedia: Reversal film
- Wikipedia: C-41 process
- Wikipedia: Digital ICE
- FADGI: Technical Guidelines for Digitizing Cultural Heritage Materials, third edition (May 2023)
- Library of Congress: Care, Handling and Storage of Photographs
- The National Archives blog: Top tips for caring for photographs
Published by Archive.London. Corrections are welcome under our editorial policy.

