The picture inside a slide mount rarely says when it was taken. The two-inch square of card or plastic around it often does, within a few years, if you know which details are evidence and which are decoration.
A slide mount is a postmark, not a birth certificate: it records when film passed through a laboratory, not how long it waited in the camera.
A 35mm slide sits in a mount 2 inches square, and for seventy years Kodak changed the printing on its Kodachrome mounts every few years: the wording, the typeface, the logo, and from about 1958 a stamped processing date. Line those changes up and a slide with no caption can usually be placed within a span of years, sometimes to the month. Most guides stop at the chart. Our angle is that a mount is evidence, and evidence has a grade. Some clues give a firm earliest date, some a firm latest date, some only a likelihood, and the commonest mistake in cataloguing is to write down a likelihood as a fact. So this guide gives the chart and, beside each clue, what it is actually worth.
What can a slide mount actually tell you?
Four things, in descending order of reliability.
- Which laboratory processed the film, if it used its own printed mounts.
- Which film or process it was, if the mount names it.
- The earliest the slide can have been mounted, from the design of the mount. A style introduced in 1972 cannot be on a slide mounted in 1965.
- When it was processed, if a date is stamped or printed on it.
Notice what is missing. No mount records the day the shutter was pressed. A mount dates a laboratory visit. The photograph is older than that by a day, a season, or in the case of a roll finished at the following Christmas, a year.
How did Kodachrome mounts change, decade by decade?
Kodachrome is the best documented case because, for much of its life, Kodak processed it and returned it in Kodak's own card mounts. The outline below follows a working guide to Kodachrome dating published in 2024 in the online library of the photograph conservator Gawain Weaver. The guide marks most of its dates as approximate, and so should you.
| Period | What the mount looks like | Evidence value |
|---|---|---|
| 1939 to 1949 | Red border; the single word "Kodachrome" in a geometric sans serif; numbered, undated; "Made in U.S.A." | Good for the decade |
| 1949 to about 1955 | Red border; wording expanded to "Kodachrome Transparency" | Good |
| 1955 to 1959 | Red border with "Processed by Kodak" added | Firm earliest date of 1955 |
| 1958 to 1962 | Two separate boards glued together instead of one folded card; impressed or ink-stamped date | Date is direct evidence of processing |
| About 1958 onwards | Red-and-yellow corner-curl logo appears | Firm earliest date |
| 1961 to 1962 | "Kodachrome II Transparency" | Firm earliest date of 1961, the year the film was introduced |
| Mid-1960s to 1972 | Smaller corner-curl logo; heavy slab lettering; patent number on the back | Fair |
| About 1972 to 1980 | New rectangular red-and-yellow Kodak logo; blocky sans serif; square outer corners | Fair |
| About 1980 to 1988 | Rounded outer corners; yellow striped or ribbon designs with a "K" | Firm earliest date of about 1980 |
| 1989 to 1994 | "Kodalux" wordmark; "Processed by Kodak" removed | Good |
| 1995 to 2006 | "Kodak" with "Premium Processing", then "Slide Processing by Kodak" or "Kodak Picture Processing" | Good |
| 2006 to 2009 | Final designs, sometimes without the word "Kodachrome" | Good |
Two entries deserve a note. "Processed by Kodak" is not a boast. Until the mid-1950s the price of Kodachrome in the United States included processing by Kodak, an arrangement ended by an antitrust consent decree in 1954. Once other laboratories could process the film, Kodak began identifying its own work, and independent labs issued their own mounts, many imitating Kodak's to varying degrees. A red-bordered mount without those three words is therefore either earlier than 1955 or not Kodak's.
And the film names help. Kodachrome II was introduced in 1961; Kodachrome 25 and 64 replaced it and Kodachrome-X in 1974. A mount naming one of them cannot be earlier than the film.
Mounts made by Kodak's plants in England, France and Italy follow related but different designs, including a striped red border in France in the 1950s, so a slide processed in Europe may not match the American sequence.
How do you read the date stamp?
From about 1958 Kodak mounts carry a processing date, at first pressed into the card without ink and later printed. It normally gives a month and a year, often alongside the frame's number within the roll. Impressed dates can be almost invisible; tilt the mount under a raking light, as you would to see the relief on the Kodachrome itself.
The frame number is worth as much as the date. It restores the order in which the pictures were taken, which makes it possible to rebuild a roll from a shuffled box, and a rebuilt roll lets one identifiable picture date the other thirty-five.
Record the stamp as what it is. "Processed June 1962" is a fact. "Taken June 1962" is an inference, and "taken summer 1962" is usually the honest version.
What about Ektachrome, plastic mounts and laboratory mounts?
Outside Kodachrome, the trail is fainter, and this matters because a great deal of professional work was not shot on Kodachrome at all. Ektachrome and the other E-6 films could be processed by any competent laboratory, and each lab chose its own mounts.
What to look for:
- A laboratory name printed or embossed on the mount. Trade directories and old advertisements can sometimes bracket the years a lab traded under that name.
- A film or process name. Kodak's Ektachrome mounts name the film. The process itself narrows the date: E-4 ran from 1966 and was largely gone after 1977, when E-6 took over.
- A printed number or date. Automated mounters often printed a frame number, and some a month and year, on plastic mounts.
- The mount maker's name moulded into the plastic, which identifies the supplier rather than the date.
- Handwriting. A caption in the photographer's hand is frequently the best evidence on the object.
Plastic mounts sold empty for home use complicate matters, because a photographer could buy a box and use it for ten years. A plain mount of that kind should be treated as nearly silent.
Medium format transparencies are a different case again. They were commonly returned unmounted, in strips or as single frames in sleeves, and their evidence is on the film edge, the sleeve and the job bag, not on a mount.
What do glass mounts tell you, and what do they hide?
Glass mounts sandwich the film between two thin panes in a plastic or metal frame. They were chosen for projection, because they hold the film flat and protect it from fingers, and their presence tells you that a slide was thought worth showing repeatedly: a lecture set, an audio-visual programme, a portfolio.
They are nearly always a second mounting. The original card or plastic mount, with its date, was discarded when the slide was put under glass, so the best evidence has gone. Glass also brings problems of its own for the person scanning: interference patterns known as Newton's rings where film touches glass, dust sealed inside, and moisture trapped against the emulsion, which encourages mould. For those slides, removal for scanning is often justified; our guides to cleaning slides and negatives and scanning 35mm slides cover the handling.
What are the limits of dating by mount?
Every clue above can mislead, and it is worth listing how.
- Remounting. Slides were remounted after damage, for projection, or when an agency applied its own branded mounts. The mount then dates the remounting.
- Old stock. Laboratories used up existing mounts after a new design appeared, so styles overlap by a year or more.
- Imitation. Independent labs copied Kodak's look. A mount that resembles a Kodak design of 1960 may be a lookalike from another firm.
- Delay. Exposure and processing can be far apart.
- Duplicates. A duplicate slide carries the date it was copied, not the date of the original. Duplicates were routine in picture libraries, which sent copies out and kept originals in.
- Regional variation. European Kodak mounts differ from American ones.
The sound method is to treat the mount as one witness among several. The film edge is another, though it is hidden while the slide is mounted: its printing names the stock, and on some Kodak films a small set of symbols encodes the year of manufacture, as described in our guide to edge print and notch codes. The film type is a third, and our comparison of Kodachrome, Ektachrome and Velvia explains how to tell them apart. The subject is a fourth: cars, shopfronts, hemlines and telephones are datable in their own right.
How should the date go into a catalogue?
Separate what you saw from what you concluded. A good record has a transcription field for exactly what the mount says, including stamps, numbers and handwriting, and a date field that states its own confidence: an exact date, "circa", "not before" or "not after", with a note of the reasoning. That way a later researcher who finds the photographer's diary can correct the date without having to re-examine the object.
Photograph or scan both faces of a mount when its information will not survive in any other form. It adds seconds per item and preserves the one piece of the object that a scan of the image leaves out. The wider method is set out in how to catalogue a photographic archive.
What will mounts tell us about the Robert Harper archive?
The Robert Harper Photograph Library is principally a medium format archive: the 2025 inventory gives 6 x 7 colour transparency film as the main analogue format. It also lists four folders explicitly as 35mm slides: a week in the life of a marquee (838 frames), Scotland (481), Tuscany and Lucca (361) and Jamaica (236), which is 1,916 frames. Those are exactly the kind of location and travel sets for which mount evidence, frame numbers above all, helps rebuild sequence and date.
We have not yet examined those mounts systematically, and we will not describe what they show until we have. More than half of the archive is still on film and has yet to be scanned, and recording mount evidence is one of the things we want done properly during that work. The analogue collection describes the holdings.
Scanning bureaux and cataloguers who capture this kind of physical evidence as a matter of course are the partners we are looking for; the details are on our digitisation partners page.
Frequently asked questions
How do you date a Kodachrome slide from its mount?
Read three things: the wording, the logo and any stamped date. Red-bordered mounts reading only 'Kodachrome' are 1939 to 1949. 'Processed by Kodak' appears from 1955. An impressed or inked month and year appears from about 1958. Rounded corners begin around 1980, 'Kodalux' runs from 1989 to 1994, and the last Kodak designs date from 2006 to 2009.
What does the date stamped on a slide mount mean?
It is the month and year the film was processed and mounted by the laboratory. It is not the date of the photograph. Film could stay in a camera for months, or sit in a drawer for longer before being sent off. Treat the stamp as the latest possible date for the picture, and look for other evidence of how much earlier it might be.
Can you date slides in plastic mounts?
Less precisely. Plastic mounts were used by many laboratories and were also sold empty for home mounting, so designs are not tied to a single maker's timeline. Look for a laboratory name, a printed frame number or date, and the mount maker's name moulded into the plastic. Then turn to the film itself, the subject and the box it came in.
Does the mount tell you what film the slide is?
Often. Kodak's own mounts name the film, such as 'Kodachrome Transparency' or 'Kodachrome II', and Ektachrome mounts say so too. A generic laboratory mount usually indicates E-6 film without naming the stock. The surest answer is printed on the film edge, which is hidden by the mount, and Kodachrome can also be recognised by the relief on its emulsion side.
Should slides be taken out of their mounts to scan them?
Not as a routine. The mount protects the film and carries evidence: dates, numbers, laboratory names and handwriting. Record or photograph both faces of the mount before any remounting, and keep original mounts with the item reference if film has to be removed for flatness, conservation or full-frame scanning. Glass mounts are a separate case and may justify removal.
Sources
- Kodachrome dating guide, working copy 2024 (library of Gawain Weaver, photograph conservator)
- Wikipedia: Kodachrome
- Wikipedia: Ektachrome
- Wikipedia: Reversal film
- Kodak: Guide to Identifying Year of Manufacture for Kodak Motion Picture Films
Published by Archive.London. Corrections are welcome under our editorial policy.

