Slide film had no second chance at colour: what the emulsion decided was what the editor saw. Three famous films made three different decisions, and the evidence is still readable on the lightbox.
A transparency is not a record of what was in front of the lens; it is a record of what one film thought about it.
Kodachrome was introduced in 1935, Ektachrome in 1946 and Velvia in 1990, and between them they coloured most of what the twentieth century saw in print. They are usually compared by look: Kodachrome rich and restrained, Ektachrome cool and clean, Velvia loud. That is true as far as it goes. Our angle is more practical. Each film was a colour opinion built into chemistry, each can be identified by eye on a lightbox without specialist kit, and the identification matters now for a reason nobody foresaw when the film was made: it changes how the slide should be scanned and how honestly its colour can be described to anyone training a model on it.
If the word "transparency" is new to you, start with our explainer on what a transparency is.
What is the difference between Kodachrome, Ektachrome and Velvia?
| Kodachrome | Ektachrome | Velvia | |
|---|---|---|---|
| Maker | Kodak | Kodak | Fujifilm |
| Introduced | 1935 (cine); 35mm stills 1936 | 1946 | 1990 |
| Process | K-14 in its final form, from 1974 | E-6 for current and late twentieth-century stock; E-1 to E-4 earlier | E-6 |
| How the dyes get there | Added during processing, layer by layer | Dye couplers built into the emulsion | Dye couplers built into the emulsion |
| Typical speeds | 25, 64, 200 | 64, 100, 200, 400 and others | 50, later 100 |
| Character | Dense, sharp, moderate saturation | Neutral to cool, lower contrast in current E100 | Very high saturation and contrast |
| Status in November 2026 | Discontinued; no colour processing | In production as E100 | Velvia 50 and 100 in Fujifilm's range, with regional gaps |
The fundamental divide is between Kodachrome and the other two. Kodachrome is what chemists call non-substantive: the film itself is three layers of black-and-white emulsion with no colour-forming ingredients in it. The colour arrives in the laboratory, where each layer is developed in turn with its own dye-forming developer. Ektachrome and Velvia are substantive films. Their colour couplers are in the emulsion from the start, and one standard process, E-6, serves both.
That difference explains almost everything else, from how the films look to where they could be processed and how they have aged.
Why did Kodachrome look the way it did?
Kodachrome was devised by Leopold Godowsky Jr. and Leopold Mannes, two professional musicians with scientific training, and brought to market by Kodak on 15 April 1935. Because its layers held no bulky couplers they could be made thin, so less light scattered inside the film and the image stayed crisp. The dyes, chosen by Kodak's chemists and delivered in Kodak's own plants, gave a palette that photographers found dependable: strong reds, deep blacks, and a certain sobriety everywhere else.
The price was the process. K-14, the last version, introduced in 1974 alongside Kodachrome 25 and 64, used four developers and eight or more tanks, and needed trained technicians and specialised machinery. A photographer could not develop it in a sink. It also could not be rushed, which is one reason professionals on deadline increasingly reached for Ektachrome, and a reason the film appears less often in studio archives than its fame suggests.
Kodak announced the end of Kodachrome 64 on 22 June 2009. Dwayne's Photo in Parsons, Kansas, the last K-14 line, processed everything received by 30 December 2010.
What made Ektachrome the professional's default?
Convenience, at first, then versatility. Ektachrome appeared in 1946 as a film that laboratories other than Kodak's could process, and that a determined photographer could process personally. It also came in faster speeds than Kodachrome: High Speed Ektachrome was announced in 1959 at ASA 160, and for decades National Geographic used Ektachrome where Kodachrome was too slow.
Its early chemistry was less durable. The E-3 process of 1959 to 1976 is associated with transparencies that faded quickly, and E-4 film had an expected life of about thirty years; E-6, which arrived in the mid-1970s, was the turning point. Anyone sorting old slides should assume that an Ektachrome from the 1960s may have shifted colour while a Kodachrome of the same age in the same box has not. Our piece on why colour slides fade explains the mechanism.
The modern film is a different animal. Ektachrome was discontinued in stages, with all products gone by late 2013, and returned as E100 in 35mm on 25 September 2018. Kodak's data sheet for E100 (E-4000, August 2018) describes moderately enhanced saturation, a neutral colour balance and a low-contrast tone scale, with a granularity figure of 8. On 12 February 2026 PetaPixel reported that Eastman Kodak had taken over distribution of E100 from Kodak Alaris in 135 and 120 rolls, and that there was no reason to think the formulation had changed.
Why did Velvia change landscape photography?
Fujifilm launched Velvia in 1990 as a professional film at ISO 50. Its code, RVP, is still printed on its edges. Where Ektachrome of the period aimed at neutrality, Velvia aimed at pleasure: very high saturation, high contrast and exceptional sharpness. Greens became emphatic, skies deepened, and a dull afternoon came back from the lab looking like a better one.
Photographers adapted to it rather than the other way round. Many rated it at an exposure index of 40 or 32 instead of 50, giving a little more exposure for shadow detail and slightly calmer colour. The original also suffered more than most films in long exposures, with colour shifts appearing from a few seconds and Fujifilm advising against exposures of 64 seconds or more.
Velvia has had a complicated later life. The original was discontinued in 2005, replaced by Velvia 100, and then reintroduced as Velvia 50 in 2007. Velvia 100 was withdrawn in the United States on 6 July 2021 because it contains trace amounts of a substance restricted by the Environmental Protection Agency. Check current availability in your own market before planning around either.
How do you recognise each film on a lightbox?
You need a lightbox, a loupe and a raking light. In rough order of reliability:
- Read the edge. Unmounted film names itself in the rebate. Look for "KODACHROME", "EKTACHROME" or a code such as E100, and "RVP" for Velvia. Our guide to edge print and notch codes explains what else the margins say.
- Read the mount. Kodak-processed Kodachrome came back in card mounts printed with the film's name, and from the late 1950s usually with a processing date. The details are in our guide to dating a slide from its mount. A plain plastic lab mount tells you only that the film is probably E-6.
- Look for relief. Hold the slide at an angle so light skims the emulsion side. Kodachrome has a pronounced relief image, the outlines of the picture standing proud like a shallow engraving. E-6 films are far flatter.
- Look at the blacks and the unexposed edges. Kodachrome's maximum density is deep and neutral to slightly warm. This is a judgement, not a test, and it is easily fooled by fading.
- Look at the palette last. Saturated greens and magenta-leaning shadows suggest Velvia; a cooler, quieter rendering suggests Ektachrome. Colour is the least trustworthy clue because lighting, filtration and sixty years in a loft all change it.
No single clue is proof. Two that agree are usually enough for a catalogue record, entered with the word "probably" if need be.
What does the film stock mean for scanning?
Three things change with the answer.
Dust removal. Many scanners detect dust with an infrared channel, on the principle that colour dyes are transparent to infrared and dirt is not. Kodachrome breaks the assumption: its cyan dye absorbs into the near-infrared, and its relief surface confuses matters further. The result can be softened detail or outright artefacts. Operators either disable infrared cleaning for Kodachrome or use a mode written for it; the alternatives are covered in our guide to dust removal on film scans.
Colour profiling. A scanner profiled with an E-6 target will tend to give Kodachrome a blue cast. A Kodachrome target and profile correct it. The same logic applies less dramatically between Ektachrome and Velvia.
Fading. Kodachrome kept in the dark is remarkably stable: its least stable dye is estimated to lose 20 per cent in about 185 years. Under a projector lamp it is the opposite, fading faster than E-6 films. Early Ektachrome is the usual casualty in the dark. For faded originals a first-pass correction can be tried in the browser with our restore faded photo colours tool, though a serious restoration belongs in a colour-managed workflow.
What does it mean for AI training data?
A model trained on scanned transparencies learns the film's opinion along with the subject. A dataset that is mostly Velvia will teach that grass is that green. One built from faded E-3 Ektachrome will teach that the 1960s were magenta. Neither is a flaw to be scrubbed out, but both are facts a dataset ought to declare.
The practical step is metadata. Recording the film stock where it can be read, the process family, the scanner profile used and whether any fade correction was applied turns a pile of pictures into a documented source. It lets a buyer filter, rebalance or deliberately keep the period colour. That is the sort of detail we set out in our dataset card, and it is cheap to capture at the moment of scanning and expensive to reconstruct afterwards.
What does the Robert Harper archive hold?
The Robert Harper Photograph Library records 52,684 unique analogue photographs, and its 2025 inventory gives 6 x 7 colour transparency film as the principal analogue format, with 35mm slides for travel sets from Scotland, Tuscany, Jamaica and elsewhere. The inventory describes formats, not emulsions. Which stocks were used, and in what proportion, has not been catalogued, and we are not going to guess: more than half of the archive is still on film and has yet to be scanned, and the film edges will answer the question as that work proceeds. The analogue collection sets out what is held.
For AI and data teams, licensing is available by negotiation with the single rights holder, subject to rights review; the starting point is our page on AI training data licensing. Scanning and cataloguing specialists who know their Kodachrome from their Ektachrome are invited to read about digitisation partnerships.
Frequently asked questions
How can you tell Kodachrome from Ektachrome?
Tilt the slide so light glances off the emulsion side. Kodachrome shows a pronounced relief, like a faint engraving of the picture, because its dyes were added during processing. E-6 films such as Ektachrome and Velvia are much flatter. Then read the mount and the film edge: Kodak-processed Kodachrome usually says so on the card, and unmounted film names its stock in the rebate.
Why can't Kodachrome be developed any more?
Kodachrome needed its own process, K-14, in which the three dye layers were developed one after another with separate colour developers. Kodak announced the end of Kodachrome 64 on 22 June 2009, and the last laboratory running K-14, Dwayne's Photo in Parsons, Kansas, processed rolls received up to 30 December 2010. No commercial colour process for it exists today.
Is Ektachrome still made in 2026?
Yes. Ektachrome E100 returned in 35mm in September 2018, with 120 and 4 x 5 sheet film announced in December 2019. In February 2026 PetaPixel reported that Eastman Kodak had taken over its distribution from Kodak Alaris, in 135 and 120 rolls, with no indication of any change to the 2018 formulation. It is processed in standard E-6 chemistry.
Why is Velvia so saturated?
By design. Fujifilm introduced Velvia in 1990 as a professional ISO 50 film with very high saturation, high contrast and fine grain, and it became a standard for landscape and nature work. The same qualities make it unforgiving for skin and for scenes with a wide brightness range. Later versions, Velvia 100F and Velvia 100, adjusted the balance.
Should Kodachrome slides be scanned differently?
Yes, in two respects. Infrared dust and scratch removal is unreliable on Kodachrome because its cyan dye is partly opaque to infrared, so many operators switch it off or use a Kodachrome-specific mode. Colour also needs its own profile: Kodachrome tends to scan with a blue cast on scanners profiled for E-6 film, and a Kodachrome calibration target corrects it.
Sources
- Wikipedia: Kodachrome
- Wikipedia: Ektachrome
- Wikipedia: Velvia
- Kodak Professional Ektachrome E100 technical data, publication E-4000 (August 2018)
- PetaPixel: Ektachrome slide film is now distributed directly by Kodak (12 February 2026)
- Kodachrome dating guide, working copy 2024 (library of Gawain Weaver, photograph conservator)
Published by Archive.London. Corrections are welcome under our editorial policy.

