A colour slide can fade in a closed box. Heat, not light, is the main cause, and the loss cannot be reversed in the film. It can be slowed, and it can be recorded.
Colour slides fade because the image is made of dye, and dye is chemically restless. Each of the three coloured layers in a transparency is an organic compound whose molecular bonds break over time. No light is needed. A slide in a closed box in a warm room is fading now, slowly, and the Image Permanence Institute (IPI) at Rochester Institute of Technology identifies this dark fading as the main cause of colour loss in chromogenic film. The process cannot be reversed in the film. It can be slowed a great deal, and what remains can be recorded.
Why do slides fade even in the dark?
A black-and-white negative holds its image in particles of metallic silver. A colour transparency holds no silver at all by the time it leaves the laboratory: bleach and fixer remove it, leaving cyan, magenta and yellow dyes suspended in gelatin. Those dyes are far less stable than silver.
IPI's guidance on film is direct about the cause. Many colour film dyes are unstable organic compounds, their bonds break, and the result is lower density and lower contrast. Higher temperature accelerates the reaction; relative humidity has a smaller effect. "The temperature at which color materials are stored is the critical factor in arresting the progress of dark fading," the institute's Filmcare guidance says. The Northeast Document Conservation Center gives a rule of thumb for photographic materials in general: the rate of deterioration roughly doubles with each 10°F rise in temperature.
Light matters too, in a different way. For slides the main exposure is the projector. IPI notes that light fading becomes a concern for slide film projected for more than a few hours in total, and that it often affects the magenta layer most.
Why do faded slides turn magenta, red or purple?
If all three dyes faded equally, an old slide would simply look thin. They do not. Each dye has its own rate, so the balance between them drifts, and the picture takes on a cast.
Which cast depends on the film. The US National Film Preservation Foundation describes the purplish look of many older colour films as the result of rapid fading of the cyan and yellow dyes, leaving magenta dominant. IPI's examples include film in which only the magenta layer remains and film in which the yellow has disappeared entirely. Rates differ by stock and by period of manufacture, because manufacturers changed the dye-forming couplers over the decades.
The useful point for anyone looking at a box of slides is that a strong, even colour cast across a whole roll often signals dye fading and not a fault in the original photograph. A quick way to see it in a scan is the image histogram tool: in a faded slide the red, green and blue curves no longer span the same range.
Which slide films fade fastest?
Generalisations by brand are risky, but some findings are well established.
| Film or process | Dark storage | Projection |
|---|---|---|
| Kodachrome (K-14 and earlier) | Very stable; widely regarded as the best of its era | Weak; fades quickly in the projector beam |
| Early Ektachrome (early 1950s) | Much less stable than Kodachrome, according to IPI | No figure in the sources used here |
| Process E-3 transparencies | Recorded as fading quickly | No figure in the sources used here |
| Process E-6 films, especially from the mid-1980s | Considerably improved | Generally better than Kodachrome |
On Kodachrome the published figures are striking in both directions. One calculation gives its least stable dye, the yellow, a 20 per cent loss in 185 years of dark storage. Under projection, Wilhelm Imaging Research put its fade time at about one hour, compared with two and a half hours for Fujichrome. NEDCC's training material summarises the position in one line: Kodachrome is very stable in the dark but fades rapidly when exposed to light.
IPI adds that the dark stability of chromogenic materials reached the best level the process allows from about the mid-1980s. That is an improvement, not immunity. A transparency from any period is still a dye image.
Can fading be stopped or reversed?
Reversed, no. IPI puts it without qualification: dye fade is irreversible, and when a dye fades the image information it carried is gone from the film. Rudolf Gschwind and Franziska Frey, whose 1997 paper on reconstructing faded colour photographs came out of the University of Basel and IPI, wrote that it is impossible to restore such images by chemical means.
Slowed, yes, and by a wide margin. The single effective measure is cold. The National Film Preservation Foundation states that the colder the conditions, the slower the fading, and that cold storage is the only way to guarantee centuries of useful life for colour film. The Library of Congress recommends 40°F (about 4°C) or below for colour photographs and film negatives, with relative humidity of 30 to 50 per cent. IPI's Media Storage Quick Reference likewise recommends its cold category for colour film and advises that most media should not be kept long-term at room conditions.
For a private owner without a cold store, the practical version is this.
- Keep originals in the coolest room that stays dry and stable all year, never an attic, basement or garage.
- Keep them in the dark, in enclosures that have passed the Photographic Activity Test.
- Stop projecting originals. Project or display a copy.
- Scan while there is still dye to record.
The detail is in how to store slides and transparencies for the long term.
What can scanning do for a faded slide?
Two different things, which should be kept apart.
First, a scan fixes the image at its present state. Whatever happens to the film afterwards, the file records what the dyes looked like on the day of capture. FADGI's guidelines for cultural heritage digitisation say that digitised material should document the appearance of the original at the time of capture, so the master file of a faded slide should itself look faded.
Second, a copy of that scan can be corrected. Because the three dyes correspond roughly to the three colour channels of a digital image, rebalancing the channels can bring a cast back towards neutral. The restore faded photo colours tool does this by stretching each channel separately, and the white balance tool removes a cast by reference to something in the picture that should be grey. Neither can bring back shadow detail or colour distinctions that the dye no longer holds. Where the line falls between correction and guesswork is the subject of restoring faded colour slides digitally.
What this means for an archive still on film
The Robert Harper Photograph Library holds 52,684 unique analogue photographs by its inventory's count, which has not yet been independently reconciled, and the principal format is 6 x 7 colour transparency film: dye images, all of them. More than half of the archive is still on film and has yet to be scanned. The inventory does not record film stocks or processing, and no assessment of colour condition has been published, so no claim is made here about how any of it has aged. The general chemistry is reason enough to treat scanning as timely.
The material is described in the analogue collections and listed in the archive inventory. Laboratories and conservators with experience of colour transparency collections are invited to make contact through the digitisation partners page.
Frequently asked questions
Why do slides fade in the dark?
Because the dyes that form the image are unstable organic compounds. Their molecular bonds break down spontaneously, and warmth speeds the reaction. Light is not required. The Image Permanence Institute describes this dark fading as the main cause of fading in chromogenic colour film, with storage temperature the critical factor and relative humidity a smaller one.
Why have my old slides turned red or magenta?
The cyan, magenta and yellow dyes in the film fade at different speeds. In many older films the cyan and yellow dyes went faster than the magenta, so what remains leans towards magenta, red or purple. The exact shift depends on the film stock and when it was made, and on how warm the slides were kept.
Does Kodachrome fade?
Slowly in the dark, quickly in a projector. Stored in darkness, Kodachrome has proved more stable than other colour films of its time; one calculation gives its least stable dye, the yellow, a 20 per cent loss in 185 years. Under projection it is weaker than other slide films, with a fade time of about one hour according to Wilhelm Imaging Research.
Can faded slides be restored?
Not chemically. Once a dye has faded, the image information it held is gone from the film. A scan of the slide can be corrected so that its colour balance approximates the original, and research at the University of Basel showed that fading can be modelled mathematically and reversed in the digital file. That is a reconstruction on a copy; the film stays as it is.
How should colour slides be stored to stop fading?
Cold, moderately dry and dark. The Library of Congress recommends storage at 40°F (about 4°C) or below for colour photographs and film, with relative humidity between 30 and 50 per cent. Where cold storage is not possible, choose the coolest stable room in the building, avoid attics and basements, and limit projection and display of originals.
Sources
- Image Permanence Institute, Filmcare.org: Dye fading
- National Film Preservation Foundation: Color dye fading
- Library of Congress: Care, Handling and Storage of Photographs
- NEDCC Preservation 101, Session 5: Storing Photograph Collections
- NEDCC Preservation Leaflet 5.3: Care of Photographs (revised 2019)
- Wikipedia: Kodachrome (archival stability, citing Wilhelm Imaging Research)
- Wikipedia: E-6 process
- Gschwind and Frey, Digital Reconstruction of Faded Color Photographs (1997)
- FADGI: Technical Guidelines for Digitizing Cultural Heritage Materials, third edition (May 2023)
Published by Archive.London. Corrections are welcome under our editorial policy.

