How to use the White Balance Correction tool
- Choose or drop a photo with a colour cast.
- Click something that should be neutral grey or white, or switch on automatic balance.
- Fine-tune with the temperature slider for blue to yellow and the tint slider for green to magenta.
- Download the corrected image.
To correct white balance, open the Archive.London white balance tool, add your photo and click an area that should be neutral grey or white, such as a white shirt or a grey card. The tool removes the colour cast from the whole image. Alternatively use automatic balance, fine-tune with temperature and tint, then download.
Choosing a neutral point: what to click on
The click method works by a simple rule: whatever you click is declared colourless, and the red, green and blue channels are scaled until it is. Everything else in the picture shifts by the same amounts.
Good targets are things that were truly neutral in the scene: a grey card, white paper, a shirt collar, grey concrete, the white of a plate. Mid-greys and off-whites work better than the brightest highlight, because a blown-out area has no colour information left to measure. Avoid surfaces that only look neutral, such as cream walls, stainless steel reflecting a coloured room, or snow in open shade, which is properly blue.
If the first click overcorrects, click somewhere else. Different neutrals in the same scene often disagree, especially under mixed lighting, where no single setting can be right for the whole frame.
Grey-world auto balance, temperature and tint explained
Automatic balance uses the grey-world assumption: averaged across a whole scene, colours should come out as neutral grey. The tool measures the average and scales the channels to make it so. It is fast and often right for ordinary scenes with a mix of colours. It is wrong when one colour legitimately dominates. A sunset, a close-up of a red dress or a lawn filling the frame will be pushed towards a dull neutral, so treat it as a starting point.
The two sliders follow the convention used by raw converters. Temperature moves along the blue to yellow axis and deals with light that is too cool or too warm, such as shade or tungsten bulbs. Tint moves along green to magenta and handles casts that temperature cannot reach, typically from fluorescent tubes. The output is an 8-bit sRGB file and embedded metadata is not carried over.
Casts in film and instant prints: a fault or part of the picture?
With film, white balance was fixed by the stock. Daylight film exposed under tungsten lamps came out orange unless a blue filter was fitted, which is why studio photographers matched film, lights and filters with care, and why a grey card in the first frame was a common reference.
When correcting a scan, it helps to ask whether the colour is an error at all. A warm evening portrait or a cool overcast landscape may be exactly what the photographer intended, and instant prints have a colour character of their own that neutralising would flatten. The Robert Harper Photograph Library includes more than 4,000 individual Polaroid prints, a format where the palette is part of the object. A sensible rule is to correct working copies and leave master scans as captured.
Frequently asked questions
What should I click on to set the white balance?
Click something that was genuinely neutral in real life: a grey card, white paper, a white shirt, grey paving or a white plate. Choose an area that is not completely blown out, since pure white pixels hold no colour information. If the result looks wrong, try a different neutral area, or switch to automatic balance and adjust with the sliders.
What is the difference between temperature and tint?
Temperature shifts the image between blue and yellow, correcting light that is cooler or warmer than neutral, for example shade or household bulbs. Tint shifts between green and magenta, which corrects casts that sit off that axis, most often from fluorescent or some LED lighting. Most pictures need mainly temperature, with a small tint adjustment to finish.
Why does automatic white balance make my photo look worse?
Automatic mode assumes the scene averages out to grey. When a picture is dominated by one colour, such as a sunset, foliage or a coloured wall, that assumption is false and the tool removes colour that belongs there. Use the click method on a neutral object, or keep automatic balance and pull the temperature and tint sliders back.
Is this as good as adjusting white balance in a raw file?
No. A raw file holds the unprocessed sensor data, so white balance can be changed with almost no penalty. This tool works on finished images such as JPEGs and scans, where channels may already be clipped. Moderate casts correct well; extreme ones may leave odd colours in highlights or noise in shadows. If you have the raw file, correct that first.
Are my photos uploaded when I use this tool?
No. The photo is opened and corrected by your browser on your own device, and the download is generated locally. Nothing is transmitted to a server or stored, and there is no sign-up. The corrected file is saved as a new image, so your original stays unchanged on your disk.
