There are three decisions: what the print touches, what it sits behind and where it hangs. The third matters most and is the one people spend least on.
The frame is a room the photograph has to live in, and the most expensive glass in the world will not save a print from a south-facing wall.
A museum will typically show a photograph at 50 lux for three months and then put it away for nearly five years. Your hallway is probably three times as bright, and the picture has been there since you moved in.
That gap is the subject of this article. Most framing advice is a shopping list: this board, that glass. Our angle is that framing a photograph comes down to three decisions, the mount, the glazing and the wall, and that they are not equally important. The first two can be bought. The third is free and matters most. What follows takes museum practice, with its published figures, and works out what it means for people who live with their pictures.
This article is general information, not financial or legal advice.
How much light do museums allow, and how does a house compare?
The Conservation Center for Art and Historic Artifacts in Philadelphia publishes a plain table. Photographs sit in the most sensitive category, with works on paper and textiles:
| Category | Maximum light | Display period | Ultraviolet |
|---|---|---|---|
| Sensitive: photographs, works on paper, textiles | 50 lux | Three months in every five years | Ideal 0 to 10, maximum 75 microwatts per lumen |
| Less sensitive: oil paintings, wood, leather | 150 lux | Three months in every two years | Same |
| Least sensitive: metal, ceramics, stone, glass | 300 lux | Continuous for most objects | Same |
Light damage is cumulative, and the same guidance gives the sum: lux multiplied by hours equals lux hours. A higher level for a shorter time does the same harm as a lower level for longer.
So do the sum. A museum showing of 50 lux, eight hours a day, for 90 days comes to about 36,000 lux hours, and that is the allowance for five years. A domestic hallway at a modest 150 lux, lit for ten hours a day, delivers 1,500 lux hours daily. It reaches the museum's five-year figure in 24 days. Over five years it delivers roughly 75 times the museum dose. Near a window, where daylight runs into the thousands of lux, the multiple is far larger.
Nobody is suggesting you live in the dark. The point of the arithmetic is to show where the damage comes from, so that money and effort go to the right place.
Decision one: what should the photograph touch?
Everything inside the frame is in contact with the print for years, so it has to be chemically quiet. The Library of Congress's guidance for matting and framing is specific:
- Board: 100 per cent cotton rag, or chemically purified wood pulp free of lignin, at least 4-ply, for both the window mat and the back mat. For photographs the board should have passed the Photographic Activity Test, the standard check that a material will not react with a photographic image.
- Attachment: non-adhesive first: photo corners, mounting strips or polyester strapping. Otherwise hinges of Japanese tissue with wheat starch paste. Nothing that cannot be undone.
- Overmat, do not float: a window mat that overlaps the edges of the print protects it better than floating it in the opening.
- Backing: acid-free, lignin-free board with a moisture barrier, or corrugated plastic, at least 3 mm thick.
- Frame: metal, or wood with the rebate lined so that acids from the timber cannot migrate into the package.
Icon, the Institute of Conservation, adds a point particular to photographs: it recommends unbuffered cotton board. Much "conservation" board is buffered with an alkaline reserve, which suits most works on paper; the Fine Art Trade Guild's top framing level likewise specifies unbuffered board for sensitive photographs.
On dry mounting, the Canadian Conservation Institute is even-handed. Heat-mounting does not appear to harm a silver image, it says, but it is practically irreversible, and reheating a print to remove it is not safe. For anything you might one day sell, lend or give to an institution, irreversible is the wrong word to have on the invoice.
Decision two: what should it sit behind?
Glazing does three jobs: it keeps dust and fingers off, it filters ultraviolet, and it must not touch the print.
| Glazing | Strengths | Weaknesses | Suits |
|---|---|---|---|
| Ordinary float glass | Cheap, scratch resistant, easy to clean | Little UV filtering, reflective, heavy, shatters | Reproductions |
| UV-filtering glass | Filters most ultraviolet | Reflective unless coated, heavy, shatters | Originals in stable homes |
| Anti-reflective UV glass ("museum" glass) | UV filtering with very low reflection | Cost; still glass | Originals where viewing quality matters |
| UV-filtering acrylic | Light, shatter resistant, filters UV | Scratches, attracts dust through static | Large frames, transit, public places |
The Library of Congress's own preference for paper objects is UV-filtering acrylic. Whatever the sales name, ask the framer for the product's data sheet and read the stated ultraviolet figure. "Museum", "conservation" and "gallery" are shop words, not specifications.
Then keep the claim in proportion. The Library of Congress answers the question directly: UV-filtering glazing removes the most harmful part of light, but all light is damaging to paper, not just ultraviolet. Good glass on a bright wall slows the damage. It does not license the wall.
The air gap is not optional. A photograph pressed against glazing can stick to it when humidity rises, and the two cannot then be parted without loss. A window mat thick enough, or spacers hidden under the rebate, keeps them apart.
Decision three: which wall?
This is the decision that costs nothing and outweighs the others. Drawing the published advice together:
- Never in direct sun. The Canadian Conservation Institute's wording is that photographs of any kind, black-and-white or colour, should never be exposed to direct sunlight. Check the wall in June and in December; the sun moves.
- Not opposite a window and not where a lamp is trained on it all evening.
- Interior walls, not exterior ones, which run colder and damper.
- Away from radiators, fireplaces and air vents. Heat speeds every chemical reaction in a print.
- Not in kitchens or bathrooms. The Canadian Conservation Institute puts acceptable relative humidity at 30 to 50 per cent and says it should never exceed 60.
- Off the floor, where leaks and vacuum cleaners find things.
If the best wall in the house for the picture is the worst wall for the print, the conservators' answer is consistent: hang a reproduction there and keep the original in a box. The Library of Congress recommends exactly that for valuable items.
How long can it stay up?
Processes differ, which is why it helps to know which kind of print you own.
| Material | Sensitivity to light | Sensible domestic practice |
|---|---|---|
| Fibre-based silver gelatin, well processed | Lower; the CCI allows weeks to a few months even in bright gallery light | Long display in a dim position is reasonable |
| Resin-coated black-and-white | Higher than fibre-based, per the CCI | Rotate |
| Chromogenic (C-type) colour | High; dyes fade in light and dark | Rotate, or show a copy |
| Polaroid and other instant prints | High, and unique | Show a copy; see are Polaroids collectable |
| Pigment inkjet | Varies by ink and paper | Follow the printer's stated conditions |
Rotation is simply the museum's method at domestic scale: three or four pictures for one hook, changed with the seasons. The ones resting should be stored as described in our guide to film and print storage.
What do framers' "levels" mean, and what should you ask for?
In Britain the Fine Art Trade Guild publishes a framing standard with graded levels, summarised by the framing supplier Larson-Juhl in 2021. The top level specifies cotton mount board, reversible paper hinges with starch or cellulose paste, no self-adhesive tape, a barrier layer behind the work and UV-filtering glazing where appropriate. It is described as protecting work for more than 35 years in normal conditions. The second level, on alpha cellulose board, is put at more than 20 years; the middle level at about five; the lowest makes no claim at all. The upper levels are meant to be inspected every five years.
That gives you a script for the framer's counter:
- Which Guild level are you framing this to, and will that be written on the receipt?
- Has the mount board passed the Photographic Activity Test, and is it unbuffered?
- How is the print attached, and can it be removed without trace?
- What is the glazing product, and may I see the data sheet?
- What is the gap between print and glazing?
- What lines the rebate and seals the back?
Before ordering, it is worth settling the size. Our free print size calculator works out the largest print an image will support at a given resolution, which decides the frame, the mount proportions and the weight on the wall. Framers, conservators and museums that offer advice can be found through the photography directory.
The view from an archive
We have an interest in this that is the reverse of a collector's. The Robert Harper Photograph Library is mostly film: 52,684 analogue photographs, principally 6 x 7 colour transparencies, with 4,005 Polaroid prints, and more than half of the archive has yet to be scanned. Film that stays in its boxes in the dark is doing what conservators recommend. Any print made from it for a wall would start the clock that this article describes, which is why the sensible route to any exhibition is scans and new prints, with the originals kept back.
Galleries, publishers and exhibition partners who would like to discuss showing work from the archive can reach us through professional access.
Frequently asked questions
Is UV glass worth it for framed photographs?
Yes, as one layer of protection. UV-filtering glass or acrylic removes the most damaging part of the spectrum. It does not make display safe: the Library of Congress notes that all light damages paper, not only ultraviolet. Glazing choice matters less than where the frame hangs and for how long.
What mount board should be used for photographs?
Board made from 100 per cent cotton or chemically purified, lignin-free pulp, at least 4-ply, that has passed the Photographic Activity Test. Icon recommends unbuffered cotton board for photographs. The print should be held by photo corners or reversible hinges, never dry-mounted if it has any value, and never taped with pressure-sensitive tape.
Should a photograph touch the glass?
No. Moisture can make the emulsion stick to glazing, and separating them damages the image. A window mat of adequate thickness or spacers round the edge keep an air gap. The Canadian Conservation Institute gives this as a principal reason for matting valuable prints.
Where is the worst place to hang a photograph?
Opposite or beside a window, above a radiator or working fireplace, on an outside wall, in a bathroom or kitchen, or anywhere direct sun reaches at any time of year. The Library of Congress advises interior walls away from heat sources and vents, and keeping frames off the floor.
How long can a photograph stay on the wall?
It depends on the process. The Canadian Conservation Institute says fibre-based black-and-white silver gelatin prints tolerate weeks or a few months even in bright gallery light. Colour dye prints and Polaroids are far more sensitive, and museums commonly allow three months in every five years. At home, rotate, or display a reproduction.
Sources
- Library of Congress: Preservation guidelines for matting and framing
- Library of Congress: Will UV-filtering acrylic or glass protect my framed paper item?
- Conservation Center for Art and Historic Artifacts: Light Exposure for Artifacts on Exhibition (2020)
- Canadian Conservation Institute: CCI Notes 16/4, Care of Black-and-White Photographic Prints
- Larson-Juhl: Four Levels of Framing (summary of the Fine Art Trade Guild standard, 2021)
- Icon, the Institute of Conservation: Caring for photographic materials
Published by Archive.London. Corrections are welcome under our editorial policy.

