Managing a photographic archive

Storage conditions for film and prints: temperature and humidity

A red parcel decorated with a gold bow and curling strands of metallic stars.
Gift wrapping with a gold bow and stars.Photograph by Robert Harper. Robert Harper Photograph Library, Archive.London. From the archive, shown for illustration.

Photographs decay by chemistry, and chemistry runs faster when it is warm and damp. The published targets are specific, and the biggest gains come from the first few degrees.

Fresh acetate film kept at 21°C and 50% relative humidity is predicted to reach the onset of vinegar syndrome in about 40 years. The same film at 4°C and 40% relative humidity is predicted to last about 450. Those two figures, from the Image Permanence Institute's storage guide for acetate film, contain most of what an owner needs to know: the decay of photographs is a chemical reaction, temperature and moisture set its speed, and the difference between an ordinary room and a cold one is not a few per cent but an order of magnitude.

The targets below come from the Institute, which is based at the Rochester Institute of Technology and whose guidance underlies much museum and archive practice, with supporting advice from the Library of Congress and the Northeast Document Conservation Center.

What temperature and humidity should film and prints be stored at?

The Institute's Media Storage Quick Reference sorts storage into four temperature categories, each defined by an anchor point.

Category Temperature What it means in practice
Room 20°C (68°F) A normally heated office or home
Cool 12°C (54°F) A dedicated, chilled store
Cold 4°C (40°F) Refrigerator temperature
Frozen 0°C (32°F) At or below the freezing point of water

For all four, it gives one humidity instruction: relative humidity should be kept between 30% and 50%. The Library of Congress uses the same band for film in general, and a narrower 30% to 40% for nitrate.

The Institute's two summary statements are blunt. Most media should not be kept in room conditions, and all media types can be safely stored in a cold environment. A store that falls between two categories is judged by the nearer one, so 10°C counts as cool.

Humidity matters independently. The acetate guide records that film kept at 20% relative humidity degrades at roughly a third to a half of the rate at 50%. Dry and cool together are far better than either alone.

Which materials need cold storage and which are safe when cool?

Not everything in an archive is equally fragile. The Institute's simplified recommendations by material are these.

Material Recommended storage Note
Acetate film, black-and-white or colour Cold, 50% RH maximum Frozen if already deteriorating, and copy as soon as possible
Polyester film, colour Cold, 50% RH maximum The base is stable; the colour dyes are not
Polyester film, black-and-white Cool, 50% RH maximum The most stable film material
Nitrate film Cold Frozen if the base shows degradation; store apart
Colour photographic prints Cold, 50% RH maximum Dyes fade in the dark as well as in light
Black-and-white silver gelatin prints Cool, 50% RH maximum
Glass plate negatives Cool Colder storage offers only marginal benefit

The pattern is simple enough to remember. Anything on acetate base and anything in colour wants to be cold. Black-and-white images on polyester film or on paper are comfortable when cool. That is because there are two separate chemical problems: the plastic base of older film breaks down, which is the subject of the guide to vinegar syndrome and other film decay, and the dyes that form colour images fade with time whether or not light reaches them. Temperature is the lever on both.

Colour transparencies from a studio career fall squarely in the cold category. The reasons the format dominated professional work are covered in the article on medium-format transparency film; its preservation needs are the price of that colour.

What if you cannot afford cold storage?

Most private owners and small archives cannot build a cold store, and the published guidance allows for that. What it asks for, in order of return on effort, is this.

  1. Get out of the worst places. The Library of Congress says to keep film away from radiators and vents and out of attics, basements and anywhere prone to leaks or environmental extremes.
  2. Choose the coolest stable room. An interior room without sun, heating pipes or outside walls. Every degree below room temperature slows decay, and the acetate guide's figures show how much: about 50 years at 21°C and 40% RH, about 100 years at 16°C, about 150 years at 13°C.
  3. Control humidity before temperature. A dehumidifier and a hygrometer cost little. The Northeast Document Conservation Center describes a low-cost approach for film of 20°C with relative humidity held at 20% to 30%.
  4. Keep conditions steady. The same source warns that rapid changes in temperature or humidity speed deterioration.
  5. Measure. Put a data logger in the store and read it. A guess about a cupboard is not a storage policy.
  6. Triage. If only a little cold space is available, a refrigerator-sized unit for example, give it to colour film and to any acetate that is already deteriorating.

Material coming out of cold storage needs care too. The Institute advises preventing condensation by warming items in a sealed, waterproof bag or an acclimatisation chamber, and allowing an overnight or one-day warming period before use. For valuable material, or film and prints that are already deteriorating, ask a photograph conservator before freezing or treating anything.

Which sleeves, boxes and enclosures are safe?

An enclosure does three jobs: it supports the object, keeps out dust and light, and must not itself cause damage. The third is the one that goes wrong, because many ordinary papers, plastics and adhesives release chemicals that attack silver images and dyes.

  • Look for the Photographic Activity Test. The PAT, set out in ISO 18916, checks whether an enclosure material reacts chemically with photographs. The Institute's advice is that every component of a storage product should pass it. The standard itself cautions that passing does not make a material "archival"; it shows only that this particular chemical interaction is absent.
  • Know the companion standards. ISO 18902 covers albums, framing and storage materials for processed imaging materials. ISO 18911 covers storage practices for processed safety photographic films, and ISO 18920 covers storage practices for reflection prints.
  • Choose the right plastic. The Institute recommends polyester, polypropylene or polyethylene and says to avoid PVC and acetate plastics.
  • Or choose paper. The Northeast Document Conservation Center recommends individual high alpha-cellulose paper enclosures, made without seams, that pass the PAT for film negatives, and says old enclosures should never be reused.
  • Use three layers. The same leaflet describes sleeves, then boxes or drawers, then shelves or cabinets.

Before discarding any original sleeve, mount or envelope, copy what is written on it. Those notes are often the only caption a photograph has, and transcribing them belongs to cataloguing the archive.

One caution from the Institute keeps all of this in proportion: enclosures cannot overcome deficiencies in the storage climate. The best sleeve in a hot attic is still in a hot attic.

How should film and prints be handled?

The Library of Congress's handling rules for film are short. Use clean hands or new nitrile gloves; cotton gloves are better than fingerprints, but their fibres can scratch an emulsion. Do not touch the emulsion at all, and hold film by its edges. Keep food and drink away and the work surface clean. To those, any archive would add: one sleeve open at a time, pencil and not ink near originals, and a clean lightbox in place of a window.

Handling is also the strongest argument for digitising. Every request answered from a scan is one fewer occasion on which an original is taken from its sleeve and warmed to room temperature. The storage and the digitisation workflow are two halves of one preservation plan.

What this means for a working archive

The Robert Harper Photograph Library is a practical case of the materials this guidance was written for. Its analogue holdings are mainly 6 x 7 colour transparency film, with black-and-white negatives, contact sheets, larger-format film, 35mm slides and 4,005 Polaroid prints, and they are largely unscanned. The inventory of 503 folders records formats folder by folder, which is the information needed to decide what belongs in which storage category. It does not record measured storage conditions, the film has not been surveyed item by item, and this article makes no claim about its condition or storage.

Colour transparency film is the category for which the published advice is strictest, and it is also the material where scanning does most to reduce handling. Conservators, storage specialists and scanning companies with experience of large transparency collections are invited to make contact through the digitisation partners page.

Frequently asked questions

What temperature should film be stored at?

As cool as you can keep steady. The Image Permanence Institute recommends cold storage, around 4°C, for acetate film and all colour film, and cool storage, around 12°C, for black-and-white film on polyester base. It advises that most photographic media should not be kept long term at room temperature, and that all types can be safely stored cold.

What humidity is best for negatives and prints?

Between 30% and 50% relative humidity, held as steady as possible. That is the band the Image Permanence Institute gives for every storage temperature, and the Library of Congress gives the same range for film. Above it, mould and chemical decay accelerate; well below it, film and gelatin can become brittle. Avoid rapid swings in either direction.

Can I store negatives in a domestic freezer?

Freezing is a recognised method, and the Institute recommends frozen storage for acetate film that has begun to deteriorate. It has to be done properly: film is sealed in moisture-proof packaging before it goes in, and warmed slowly in its packaging before opening, so that condensation never forms on the film. Take advice before freezing anything valuable.

What are the best sleeves for storing negatives?

Enclosures that have passed the Photographic Activity Test, made of good-quality paper or of polyester, polypropylene or polyethylene. The Image Permanence Institute advises avoiding PVC and acetate plastics. Paper is opaque and breathes; clear plastic lets film be viewed without handling. Whichever is used, each item should have its own sleeve, inside a box, on a shelf.

Is it safe to keep photographs in an attic or cellar?

No. The Library of Congress advises keeping film away from radiators and vents and out of attics, basements and other places prone to leaks or environmental extremes. Attics get hot and swing widely in temperature; cellars are damp. An interior room or cupboard on a middle floor, away from outside walls and pipes, is a far better choice.

Sources

Published by Archive.London. Corrections are welcome under our editorial policy.

Help digitise the archive

52,684 analogue originals, mostly medium-format transparencies, are waiting to be scanned and catalogued. We are speaking to scanning, cataloguing and tagging partners.

See the digitisation briefWrite to the archive