Scanning is the fourth of eight stages. The archives that end up with usable files are the ones that spent time on the three stages before it.
A film archive is digitised in eight stages, and the scanner is involved in one of them. The order is survey, numbering, preparation, capture, quality control, file handling, metadata and storage. Projects that skip the first three tend to produce large folders of unnamed files that nobody can match to a sleeve. Projects that skip the last three produce good scans that nobody can find.
What follows is a working sequence for an owner with boxes of negatives and transparencies and a decision to make. It draws on published guidance from the US Federal Agencies Digital Guidelines Initiative (FADGI), the Canadian Heritage Information Network and the National Lottery Heritage Fund, and it applies to a shoebox as well as to a collection the size of the analogue holdings of the Robert Harper Photograph Library, which the inventory puts at 52,684 photographs.
What should you do before you scan anything?
Survey the collection. A survey answers four questions: how many items, in which formats, housed how, in what condition. Count by container and estimate by sampling; nobody counts 50,000 frames one at a time at this stage. Record film sizes separately, because 35mm strips, roll-film transparencies, sheet film, mounted slides, prints and contact sheets each need different holders, different resolutions and different amounts of time.
Condition matters because it changes the method. The Canadian guide tells operators to evaluate condition before scanning and to consult specialist conservation advice where film is decomposing or mouldy. Material that smells of vinegar, is sticking to its sleeve or shows mould goes to a conservator, not into a scanner.
The survey also sets priorities. Typical criteria are significance, demand from researchers or licensees, physical risk and how easily a group can be identified. Write the criteria down. They will be questioned later, by funders if nobody else.
How do you number film so files can be traced back to the box?
Give every physical unit an identifier before capture, and write it on the enclosure, never on the film. The Library of Congress advises marking the housing where possible and, if a print must be marked, using soft graphite pencil on the back near an edge. The Canadian guide makes the same point for slides: label the mount or the sleeve.
A workable scheme has three parts: a collection code, a container or sheet number, and a frame number. The file name is then simply that identifier. This is the single decision that most affects whether the digital archive remains trustworthy, because it lets anyone go from a file back to the object and from the object to its neighbours on the sheet.
Keep the original order. Sleeves, job bags and box labels carry information about commissions and dates that the frames themselves do not. Photograph the box lids, the job bags and any handwritten notes as part of the record.
How should film be handled and prepared for scanning?
The published advice is consistent and undramatic:
- Handle film by its edges and slides by their mounts. The Canadian guide recommends clean gloves for film; the Library of Congress suggests clean hands or nitrile gloves, noting that gloves reduce dexterity.
- Remove loose dust with a manual squeeze-bulb blower. Both sources warn against alternatives: the Canadian guide against blowing with your breath, the Library of Congress against canned air and brushes that can scratch.
- Work on smooth, cleanable surfaces in a room kept as free of dust and vibration as you can manage.
- Rehouse as you go. The Library of Congress points to enclosures that pass the Photographic Activity Test under ISO 18902.
Anything beyond dusting, including wet cleaning, is conservation work and should be specified separately.
Which capture method and specification should you choose?
There are three families of equipment: dedicated or flatbed film scanners, drum scanners and digital cameras on a copy stand. Each has a different balance of speed, quality and handling, set out in our comparison of scanner, drum and camera capture.
The specification is more important than the machine. FADGI's Technical Guidelines, third edition (approved 10 May 2023), grade capture from one star to four. For transparencies and negatives the tables read as follows.
| FADGI level | 35mm up to 4x5 in | 4x5 in and larger | Bit depth per channel |
|---|---|---|---|
| 4 star | about 4,000 ppi | about 2,000 ppi | 16 |
| 3 star | about 3,000 ppi | about 1,500 ppi | 16 |
| 2 star | about 2,000 ppi | about 1,000 ppi | 8 |
| 1 star | about 1,000 ppi | about 500 ppi | 8 |
The same tables list TIFF and JPEG 2000 as master formats. What those resolutions mean in pixels and megabytes for each film size can be checked with the film scan resolution calculator, and the choice between master formats is covered in TIFF, DNG or JPEG 2000.
Many archives run two passes. The first is a fast survey capture of every sheet, good enough to see what is there. The second is preservation capture of selected frames. If you photograph or flatbed whole sleeves of negatives for the first pass, the negative to positive converter turns them into readable positives in the browser, and the contact sheet maker lays out the results for editing.
How do you check the quality of scans?
Quality control has a technical half and a visual half.
The technical half measures the system, not the picture. FADGI's approach is to photograph a reference target and analyse it with software, so that resolution, tone, colour accuracy and noise are numbers. The Canadian guide makes the practical point that a scanner's effective resolution often falls short of the figure on the box and should be tested with a resolution target; interpolated resolution figures should be ignored.
The visual half looks at the files. Check a sample of every batch at 100 per cent for focus, dust, Newton's rings, cropping into the image, orientation and frames scanned back to front. Check the histogram for clipped highlights or shadows: the image histogram tool reports clipping percentages for a derivative of any scan. Record failures and rescans in a log, with the cause.
What happens to the files after capture, and how are they stored?
Three things, in this order.
Masters are fixed. The Canadian guide advises keeping an unedited archival master, with some film border visible, and saving adjusted versions separately as production masters. Corrections of colour, dust and cropping are made on copies.
Derivatives are made. A full-size JPEG and a small web version serve nearly every day-to-day use. For quick one-off conversions, the TIFF to JPG converter decodes 8-bit and 16-bit scans locally.
Integrity is recorded. Generate a checksum for each master at creation and store it with the catalogue record. Any later copy can then be verified.
Description happens at two levels. The catalogue holds the full record: identifier, photographer, date or date range, subject, format of the original, rights notes and location of the object. A subset is embedded in each file as IPTC metadata so that the file still says who made it and who to ask when it travels alone.
For storage, the National Lottery Heritage Fund's guidance recommends the 3-2-1 rule: three copies, on two different types of media, with one off site, applied to masters, access files and metadata alike. The volumes are easy to underestimate. Fifty thousand 6x7 centimetre frames captured at 4,000 ppi and 16 bits come to roughly 29 terabytes of uncompressed TIFF before any copies are made; the digitisation storage calculator will run the sum for your own mix of formats.
Where the Robert Harper archive stands
The Robert Harper Photograph Library is at the beginning of this sequence. Its inventory lists 52,684 analogue photographs, mostly medium-format colour transparencies with black-and-white negatives, contact sheets, larger-format film, 35mm slides and more than 4,000 Polaroid prints, and more than half of the archive is still on film and has yet to be scanned, and only a small selection has been published online by Archive.London. The counts come from the inventory and have not yet been independently reconciled, which is exactly what a survey is for. Scanning bureaux, cataloguers and imaging specialists who would like to discuss a pilot batch can find the outline on the digitisation partners page.
Frequently asked questions
What is the first step in digitising a film archive?
A survey. Before any scanning, count what you have by format, note how it is housed, sample its condition and decide what is worth capturing first. The survey produces the numbers every later decision depends on: how many frames, at what sizes, in what state. Without it, quotes from vendors are guesses and storage plans are wrong.
What resolution should a film archive be scanned at?
It depends on film size and purpose. The FADGI guidelines set their highest level, four stars, at about 4,000 ppi for film from 35mm up to 4x5 inches and about 2,000 ppi for larger sheets, with 3,000 and 1,500 ppi at three stars. Many projects choose a level per format and record the reason in the brief.
Should I scan everything or make a selection first?
Most archives do both. A fast, lower-resolution pass over everything creates a visual index, like a contact sheet, so that the collection can be searched and edited. A second, slower pass captures selected frames at preservation quality. The split keeps cost proportionate while making sure nothing stays invisible in a box.
How should scanned files be named?
Use the identifier already written on the physical sleeve or mount, so file and object can always be matched. Keep names short, unique and free of descriptive text: a collection code, a box or sheet number and a frame number is enough. Descriptions belong in the catalogue and in embedded metadata, where they can be corrected without renaming files.
How many copies of the scans should an archive keep?
At least three. The 3-2-1 rule, recommended in National Lottery Heritage Fund guidance, means three copies of every file, on two different types of storage, with one copy held somewhere else. Record a checksum for each master file at creation so that later copies can be verified against it.
Sources
- FADGI: Technical Guidelines for Digitizing Cultural Heritage Materials, third edition (May 2023)
- Canadian Heritage Information Network: How to Scan Photographic Transparencies and Photographic Negatives (25 May 2023)
- Library of Congress: Care, Handling and Storage of Photographs
- National Lottery Heritage Fund: Doing digitisation on a budget
- National Lottery Heritage Fund: Digitisation project planner, handbook and examples
Published by Archive.London. Corrections are welcome under our editorial policy.

