There was never one Polaroid. There was roll film, pack film, sheet film and the sealed square everyone pictures, and a box of old studio prints can usually be sorted with a ruler and a look at the back.
The square with the deep white chin is the Polaroid of memory; the Polaroid of working studios was a thin peeled sheet, chemistry still drying at its edge.
Polaroid made instant film in four physical forms: rolls from 1948, peel-apart packs from 1963, peel-apart sheets for professional cameras, and from 1972 the sealed integral print that became the popular image of the brand. Most guides to Polaroid film types are written for someone holding a camera and wondering what to feed it. This one is written for someone holding a print. Our angle is identification: a family tree of instant film arranged so that a box of unlabelled studio Polaroids can be sorted by what is physically in front of you, the size, the border and the back, with an honest note on where that evidence runs out.
This article is general information, not financial or legal advice. Checked on 18 November 2026.
What are the main types of Polaroid film?
Edwin Land's first camera, the Model 95, went on sale on 26 November 1948 and delivered a sepia print in about a minute. Everything after that is a variation on one chemical idea, diffusion transfer, in which a reagent carries the image from a negative layer to a positive one. What changed was the packaging.
| Family | Introduced | Typical image or sheet size | How it develops | Examples |
|---|---|---|---|---|
| Roll film | 1948 | Sheet about 83 x 108 mm, 8 per roll | Peel apart | Type 40 series |
| Pack film | 1963 | Sheet about 3.25 x 4.25 in (83 x 108 mm) | Peel apart | Type 669, 664, 665, 667, 690; Fujifilm FP-100C |
| 4x5 sheet film | Professional range | 4 x 5 in sheet | Peel apart, in a 545 holder | Type 55, colour sheets such as Type 59 |
| 8x10 sheet film | 1973 | 8 x 10 in sheet | Peel apart, with a separate processor | Type 809 |
| Integral SX-70 | 1972 | 79 x 79 mm image on a 3.5 x 4.25 in print | Sealed, self-developing | SX-70, Time-Zero (1980) |
| Integral 600 | 1981 | Same as SX-70 | Sealed, self-developing | 600, modern i-Type |
| Integral Spectra | 1986 | 73 x 91 mm image on a print about 103 x 102 mm | Sealed, self-developing | Spectra, Image, 1200 |
Roll film was the amateur product of the 1950s and is seldom met in studio archives; monochrome rolls lingered until 1992. The other families are the ones a professional box is likely to contain.
What is the difference between SX-70, 600 and Spectra film?
All three are integral films: negative, positive and reagent are sealed in one sandwich, and the picture develops in the hand with nothing to peel or throw away. The SX-70 system, announced in April 1972, was the first. Its pack held ten pictures and a flat 6 volt battery that powered the camera.
SX-70 and 600 film share a cartridge and a print size. The difference is sensitivity. Original SX-70 film was rated at around ISO 150 to 160; 600 film, launched in 1981, is about ISO 640, which let cheaper cameras with simpler lenses work indoors. Time-Zero, the faster-developing SX-70 film of 1980, was phased out in 2005 and 2006.
Spectra, introduced in 1986 and sold as Image in some markets, has a wider rectangular picture of 73 x 91 mm on an almost square card. Polaroid's support pages now list Image and Spectra film among the formats the company no longer supports.
Modern Polaroid film descends from this branch. After Polaroid announced the end of instant film manufacture in February 2008, a group calling itself the Impossible Project took over machinery and the factory at Enschede in the Netherlands, announced new SX-70 and 600 compatible film on 22 March 2010, and in 2017 acquired the brand. Its i-Type packs are 600 film without the battery.
What was peel-apart film, and why did studios prefer it?
Peel-apart film is the Polaroid that professionals knew. The photographer pulled a tab to draw the exposed sheet through rollers, waited the stated time, and peeled the print from its negative. The print is a single thin sheet; the negative, coated in spent reagent, went in the bin.
Pack film came in several emulsions, and the type numbers are worth knowing because they turn up written on boxes and job bags:
| Type | Colour or black and white | ISO | Notes |
|---|---|---|---|
| 669 | Colour | 80 | Successor to Type 108; described by one specialist guide as the most popular peel-apart film |
| 690, 679 | Colour | 100 | Later colour stocks |
| 664 | Black and white | 100 | Coaterless print |
| 665 | Black and white | 80 | Print plus a reusable negative |
| 667 | Black and white | 3000 | Very fast, for checking exposure and for low light |
Studios preferred this family for a mechanical reason. Pack and sheet film could be fitted to the cameras they were already using, by way of a Polaroid back on a medium format body or a holder on a view camera. The test was made through the same lens, at the same aperture, under the same lights as the final exposure. An SX-70 could not offer that. The practice is described in our article on Polaroid proofing before digital.
Fujifilm made compatible packs after Polaroid stopped. Its notice discontinuing FP-100C, the last of them, is dated 29 February 2016.
What were Type 55 and the 4x5 and 8x10 sheet films?
Large-format photographers had their own instant materials. Polaroid's 545 holder took single 4x5 sheets in paper envelopes and slid into a view camera in place of an ordinary film holder.
Type 55 is the celebrated one. It produced a black-and-white print rated at ISO 50 and, from the same exposure, a fine-grained negative that could be enlarged like any other, once treated in a sodium sulfite bath. Polaroid rated the negative more slowly than the print, at about ISO 25, so a perfect print meant a thin negative and photographers chose which to favour. The negative carried rough frame marks on three sides and a mesh pattern on the fourth, a border so widely admired that it was later imitated graphically by people who had never handled the film.
Instant 8x10 film arrived in 1973. It needed a dedicated holder and a separate processor to spread the reagent, and it gave a print the full size of the camera's ground glass: a proof an art director could assess at arm's length. For the largest studio cameras see our comparison of 4x5 and 8x10.
How do you identify a Polaroid from its border and its back?
Work through four questions. A ruler and good light are enough.
- Is it thick and sealed, or a thin single sheet? A sealed print with a plastic face and an opaque back is integral film. A single sheet of coated paper is peel-apart.
- If sealed, what shape is the picture? A square of about 79 mm with a deep border along one edge, where the reagent pod sat, is SX-70 or 600. A rectangle of about 73 x 91 mm is Spectra. Shape alone cannot separate SX-70 from 600.
- If a thin sheet, how big is it? About 3.25 x 4.25 inches is pack film. Four by five inches is 4x5 sheet or 4x5 pack film. Eight by ten inches is 8x10.
- How much of the sheet does the picture fill? This is the most useful clue for studio material. A camera can only expose the area of its own frame. A proof made on a 6x6 or 6x7 camera through a Polaroid back shows a small image, about the size of the camera's frame, surrounded by unexposed black on a pack-film sheet. A proof that fills the sheet was made on a camera with a frame at least that large.
Then look closer. Peel-apart prints often show a line of dried reagent or a slightly ragged margin along one edge. Black-and-white prints from older stocks that needed a protective coating may show streaks from the coater. Colour or monochrome narrows the type further, using the table above. The back of a peel-apart print is plain paper and is where studios wrote: exposure, aperture, filter, job name.
What can the back of a print tell you, and what can it not?
Handwriting on the back is frequently the best evidence in the box, better than anything the manufacturer printed. A note such as "f/22, +1/3" records the adjustment made between the proof and the final film, and a job name ties a loose print to a set of transparencies.
Integral prints often carry numbers printed on the back at the factory. These are production codes, and collectors have published guides to reading them, but treat any date derived this way as a lead to be checked against other evidence and not as a fact for the catalogue.
There are firm limits to all of this. A print cannot tell you the camera body, only the format. It records when the film was made at best, not when it was exposed. Colour is no guide to type after decades of storage, since instant dyes shift. And a print separated from its box is missing the one label that named the film outright. Record what you can measure, and mark the rest as inference.
When it comes to copying the prints, our guide on how to digitise Polaroid prints covers lighting and handling. For new pictures that borrow the look, the Polaroid frame maker adds an instant-style border in the browser, and it is exactly the sort of imitation that makes checking the physical object worthwhile.
What does the Robert Harper archive hold?
The Robert Harper Photograph Library includes 4,005 individual Polaroid prints, recorded in the 2025 inventory as Polaroid colour prints of household objects, fashion, furniture, jewellery, watches, cosmetics, food, drink, perfumes, still life and people. They are described on the Polaroid collection page, and the story of how they were used is told in 4,000 studio Polaroids.
One inventory entry shows the practice in miniature. A drinks shoot for Cinzano is recorded as 10 x 8 inch transparencies with 19 Polaroids, together with 5 x 4 inch and 6 x 7 cm film: three formats and a run of instant proofs for a single job.
We have not yet typed the collection print by print. Which sheets are pack film, which are 4x5 or 8x10, and what the annotations say, are questions for cataloguing, using exactly the method above. Curators, collectors and researchers with a professional interest in studio process are welcome to ask about professional access, and conservation and scanning specialists can read about digitisation partnerships.
Frequently asked questions
What are the main types of Polaroid film?
Four families. Roll film, from 1948, for the earliest Land cameras. Peel-apart pack film, from 1963, in sheets of about 3.25 x 4.25 inches. Peel-apart sheet film in 4x5 and 8x10 for professional cameras. And integral film, from 1972, which develops inside a sealed print: SX-70, 600, Spectra and the modern i-Type and Go formats.
How can I tell what type of Polaroid a print is?
Measure it and turn it over. A thick, sealed print with a deep lower border and a square 79 mm image is SX-70 or 600 integral film. A sealed print with a wide rectangular image of about 73 x 91 mm is Spectra. A thin single sheet with a paper back is peel-apart: about 3.25 x 4.25 inches for pack film, 4 x 5 or 8 x 10 inches for sheet film.
What is the difference between SX-70 and 600 film?
Speed. Both use the same cartridge and produce the same size of print, with a 79 x 79 mm image. Original SX-70 film was rated at about ISO 150 to 160; 600 film, introduced in 1981, is about ISO 640. A finished print from one is physically indistinguishable from the other by shape alone, so dating evidence has to come from elsewhere.
Can you still buy peel-apart Polaroid film?
Not as a regular product. Polaroid announced the end of its instant film manufacture in February 2008, and Fujifilm discontinued its FP-100C pack film in spring 2016. Polaroid's support pages list peel-apart film among formats it no longer supports. Small specialist producers have made limited single-shot packs, and unexpired original stock no longer exists.
What was Polaroid Type 55?
A black-and-white 4x5 peel-apart sheet film that gave a positive print and a fine-grained negative from the same exposure. It was loaded in Polaroid's 545 holder on a large-format camera, and the negative had to be treated in a sodium sulfite bath. The negative's rough frame marks on three sides became a visual signature later imitated in software.
Sources
- Wikipedia: Instant film
- Wikipedia: Land Camera
- Wikipedia: Polaroid SX-70
- Wikipedia: Polaroid Spectra
- Wikipedia: Polaroid Type 55
- Polaroid Support: film formats Polaroid does not support
- Moominstuff: Polaroid peel-apart instant film types (2 June 2010)
Published by Archive.London. Corrections are welcome under our editorial policy.

