How to use the Colour Blindness Simulator tool
- Choose or drop an image, such as a screenshot of a chart, map or design.
- Select a type: protanopia, deuteranopia, tritanopia or achromatopsia.
- Compare the simulated view with the original and note any colours that can no longer be told apart.
- Change the colours, labels or patterns in your design and check again.
To check an image for colour blindness problems, open the Archive.London colour blindness simulator, add a screenshot or image file and choose protanopia, deuteranopia, tritanopia or achromatopsia. Compare the simulated view with the original and look for colours that merge. The result is an approximation for design checking, not a medical test.
The four simulations and what each one tells you
Normal colour vision relies on three types of cone cell, most sensitive to long, medium and short wavelengths. Each simulation models the absence of one type, or of colour vision altogether:
- Protanopia: no working long-wavelength cones. Reds look dark and are confused with greens and browns.
- Deuteranopia: no working medium-wavelength cones. Reds and greens are confused, without the darkening of red.
- Tritanopia: no working short-wavelength cones. Blues are confused with greens, and yellows with pinks. Much less common.
- Achromatopsia: no colour vision; the image is shown in shades of grey.
Red-green deficiencies are by far the most frequent. A commonly cited figure is about 1 in 12 men and 1 in 200 women. Check deuteranopia and protanopia first, then use the grey view to test whether your design still works on lightness alone.
An approximation: the limits of any simulator
The tool applies a published mathematical model to the colours of your image. That is useful for spotting problems, but it is not what any one person sees, for several reasons:
- Most people with a colour vision deficiency have a milder, anomalous form in which one cone type is shifted, not missing. The simulations show the complete forms, so they represent the stronger end of the range.
- Screens differ. Brightness, colour settings and ambient light all change the result.
- Colour perception varies between individuals even within one type.
So treat a pass here as a good sign, not proof, and where it matters ask people with colour vision deficiency to review the design. The simulator cannot tell you anything about your own eyesight. If you have concerns about your vision, an optometrist can test it properly.
Colour-led pictures, captions and keys
Photographs chosen for their colour need the same check as charts once they are asked to carry information. A cover line set in red over foliage, a product range told apart only by shade, or a map overlaid on a landscape can each fail for a red-green deficient reader while looking fine to the designer.
Fashion, beauty, jewellery and fragrance work is built on precise colour, and those subjects make up a large part of the Robert Harper Photograph Library catalogue. For picture editors the practical habits are simple: do not let colour alone carry meaning, name colours in captions and alternative text where they matter, and pair any colour key with labels, patterns or position. The accessibility guideline WCAG 2 makes the same point in its criterion on use of colour.
Frequently asked questions
Is this a colour blindness test?
No. It does not test your eyesight and cannot tell you whether you have a colour vision deficiency. It changes an image to approximate how it may appear to someone who does, so that designers can check their work. For questions about your own colour vision, see an optometrist or another qualified eye care professional.
How accurate is the simulation?
It is a reasonable approximation based on a mathematical model of missing cone types, and it is good at revealing colour pairs that are likely to be confused. It is not an exact reproduction of anyone's vision. Severity varies from person to person, most people have milder forms than those shown, and your screen settings affect the result.
What is the difference between protanopia and deuteranopia?
Both are red-green deficiencies and cause similar confusions between reds, greens, browns and oranges. In protanopia the long-wavelength cones are missing, so red also appears darker, and red text on black can almost disappear. In deuteranopia the medium-wavelength cones are missing and brightness is perceived more normally. Checking both is worthwhile because they fail on slightly different colour pairs.
Which colour combinations should I avoid in charts and maps?
The usual trouble spots are red with green, green with brown, blue with purple, and pale green with yellow, especially when the colours are similar in lightness. Combinations that differ strongly in lightness, such as dark blue with orange or yellow, hold up better. Adding labels, patterns or different line styles means the design does not depend on colour at all.
Is my image uploaded anywhere?
No. The image is opened and converted by your browser on your own device and is not sent to any server. That makes the tool suitable for unpublished designs, internal dashboards and client work. Nothing is stored after you close the page, and there is no account or sign-up.
